Canon DC10 DC20/DC10 Instruction Manual - Page 21
Step 1: Preparing the Power Supply
UPC - 013803041583
View all Canon DC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Step Preparations 1: Preparing the Power Supply The camcorder can be powered by a battery pack or be connected to a household power outlet. Charge the battery pack before use. E Preparations Attaching and Charging the Battery Pack 1. Turn off the camcorder. 2. Attach the battery pack to the camcorder. • Open the LCD panel. • Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks. 3. Connect the power cord to the adapter. Charge indicator DC IN terminal BATT. button 4. Plug the power cord into a power outlet. 5. Open the terminal cover and connect the power adapter to the camcorder's DC IN terminal. The charge indicator starts flashing. The indicator will stay on when charging is complete. Remove the battery terminal cover before attaching the battery Once the battery is fully charged: 1. Disconnect the power adapter from the camcorder. 2. Unplug the power cord from the power outlet and the adapter. To remove the battery pack: Hold the BATT. button pressed down to release it, and pull out the battery from the ridge on its bottom part. 21