Canon DC10 DC20/DC10 Instruction Manual - Page 124
Recording/Editing
UPC - 013803041583
View all Canon DC10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Problem Solution The disc cannot be ejected. Turn off the camcorder, disconnect the compact power - adapter and remove the battery pack. Restore the power supply and try again. The camcorder has exceeded it operational temperature. Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. The camcorder vibrates. Depending on the condition of the disc, the camcorder might - vibrate occasionally. This is not a malfunction. The disc's rotation can be The disc is activated from time to time. This is not a - faintly heard. malfunction. Occasionally the operation The disc is activated from time to time. This is not a - sound can be heard. malfunction. After using the camcorder for This is not a malfunction. Turn the camcorder off and let it cool - a long time the lights up for a while before resuming operation. in red. Recording/Editing Problem Solution " " flashes red on the screen. The camcorder malfunctions. Consult a Canon Service - Center. Image will not appear on the Set the camcorder to . 33 screen. Open the lens cover. "SET THE TIME ZONE, Set the time zone, date and time. 28 DATE AND TIME" appears on Recharge the built-in lithium battery and set the time zone, 134 the screen. date and time. Pressing the start/stop button Set the camcorder to . 33 will not start recording. Load a disc. 31 The disc is full (" END" flashes on the screen). Delete some 31 recordings (DVD-RW in VR mode) to free some space or 87 replace the disc. Disc is protected. Cancel the disc protection or replace the 90 disc. The camcorder has exceeded it operational temperature. - Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. Even after stopping recording, The scene or still image is being recorded on the disc. 33 the disc access indicator does 35 not go off. The point where the start/stop There is a slight interval between pressing the start/stop - button was pressed does not button and the actual start of the recording on the disc. This is match the beginning/end of not a malfunction. the recording. The recording suddenly stops The disc is dirty. Clean the disc with a soft lens-cleaning cloth - shortly after starting or replace the disc. recording. The camcorder has exceeded it operational temperature. Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. Camcorder will not focus. Autofocus does not work on that subject. Focus manually. 52 Adjust the viewfinder with the dioptric adjustment lever. 24 Lens is dirty. Clean the lens. 137 124