Canon DR 5010C User Manual - Page 24
connect the scanner with other SCSI devices in a daisy chain configuration
UPC - 013803071535
View all Canon DR 5010C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Note • The SCSI ID is set to 2 at the factory. • The SCSI ID is set with the Dip Switches on the back of the scanner. The Dip Switches are on when they are down, and off when they are up. • To change the SCSI ID, be sure to turn OFF the scanner and the computer and refer to the following table to set the SCSI ID. Default Settings (SCSI ID = 2) 12 ON SCSI ID 2 3 4 5 SW1 OFF ON OFF ON SW2 OFF OFF ON ON IMPORTANT • Turn OFF the power to the computer and the scanner before connecting the computer and setting the SCSI ID. • The scanner has a built-in terminator that is fixed in the "ON" position. To connect the scanner with other SCSI devices in a daisy chain configuration, be sure to position the scanner at the end of the daisy chain, and turn off the terminators in the other SCSI devices. • Be careful that the IDs for other SCSI devices connected or built-in to the computer do not duplicate the SCSI ID for the scanner. 22 Installing the Scanner