Canon EOS 6D Instruction Manual - Page 153

Connection target not found, No address assigned by DHCP server, On the camera

Get Canon EOS 6D PDF manuals and user guides View all Canon EOS 6D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 153 highlights

Responding to Error Messages 11: Connection target not found In the case of [q], is EOS Remote running? X Establish a connection using EOS Remote (p.37, 78). In the case of [l], is the power of the printer on? X Turn on the power of the printer. Is the pairing software running? X Start the pairing software and follow the instructions to re-establish the connection (p.95). Are the camera and the access point set to use the same encryption key for authentication? X This error occurs if the encryption keys do not match when the authentication method for encryption is set to [Open system]. The setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct encryption key for authentication is entered on the camera (p.69, 117). 12: Connection target not found Is the power of the target device and access point on? X Turn on the power of the target device and access point. 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto assign]. Is this the correct setting? X If no DHCP server is used, configure settings after setting the IP address to [Manual setting] on the camera (p.59, 64, 70, 109, 113, 118). What to check on the DHCP server Is the DHCP server on? X Turn the DHCP server on. Are there enough addresses for assignment by the DHCP server? X Increase the number of addresses assigned by the DHCP server. X Remove devices assigned addresses by the DHCP server from the network to reduce the number of addresses in use. 153

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
153
Responding to Error Messages
In the case of [
q
], is EOS Remote running?
Establish a connection using EOS Remote (p.37, 78).
In the case of [
l
], is the power of the printer on?
Turn on the power of the printer.
Is the pairing software running?
Start the pairing software and follow the instructions to re-establish
the connection (p.95).
Are the camera and the access point set to use the same
encryption key for authentication?
This error occurs if the encryption keys do not match when the
authentication method for encryption is set to [
Open system
].
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is entered on the camera (p.69, 117).
Is the power of the target device and access point on?
Turn on the power of the target device and access point.
What to check on the camera
On the camera, IP address is set to [Auto assign]. Is this the
correct setting?
If no DHCP server is used, configure settings after setting the IP
address to [
Manual setting
] on the camera (p.59, 64, 70, 109, 113,
118).
What to check on the DHCP server
Is the DHCP server on?
Turn the DHCP server on.
Are there enough addresses for assignment by the DHCP server?
Increase the number of addresses assigned by the DHCP server.
Remove devices assigned addresses by the DHCP server from
the network to reduce the number of addresses in use.
11:
Connection target not found
12:
Connection target not found
21:
No address assigned by DHCP server