Canon EOS 6D Instruction Manual - Page 159
Multiple wireless LAN terminals have been found., Cannot connect. Retry from the beginning.
View all Canon EOS 6D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Responding to Error Messages 69: Multiple wireless LAN terminals have been found. Cannot connect. Retry from the beginning. Connection is in progress by other access points in Pushbutton Connection mode (PBC mode) of Wi-Fi Protected Setup (WPS). X Wait a while before trying to establish the connection, or try to establish a connection in PIN code connection mode (PIN mode) (p.62, 111). 91: Other error A problem other than error number 11 to 69 occurred. X Turn off and on the camera's power switch. 101: Could not establish connection Has the procedure to establish a connection between cameras been performed on the other camera as well? X Perform the procedure to establish a connection between cameras on the other camera as well. X When reconnecting cameras for which connection settings have been registered, perform the reconnection procedure on both cameras. Is connection being attempted by multiple cameras? X The camera can be connected to only one camera at a time. Confirm that no other camera is attempting to establish a connection nearby and retry connection. 102: Could not send files Are both cameras attempting to send data? X Cameras cannot receive and send data at the same time. Use only one camera to send data, and send data only after all data currently being sent has been received. Does the card in the camera to receive data have sufficient space? X Check the card in the camera to receive data. Replace the card or make sufficient space available, then try sending the data to the camera again. Is the card in the camera to receive data locked? X Check the card in the camera to receive data. Release the lock, then try sending the data to the camera again. 159