Canon FAXPHONE L170 FAXPHONE L180 Basic Guide - Page 112
Reserve Copy
UPC - 013803038477
View all Canon FAXPHONE L170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Reserve Copy This feature allows you to reserve the next job while the machine is printing out a current job. 1 Load the document faced down to be reserved in the ADF. For details on how to load documents, see "Loading Documents in the ADF," on p. 6-3. 2 Use the numeric buttons to enter the number of copies. You can set up to 99 copies. 3 Adjust any necessary settings for your document. • Press [Image Quality] to select the scanning resolution. (See "Adjusting the Image Quality (Resolution)," on p. 10-6.) • Press [Exposure] to select the scanning exposure. (See "Adjusting the Exposure (Density)," on p. 10-6.) • Press [Enlarge/Reduce] to select the copy ratio. (See "Setting Enlarging/Reducing," on p. 10-4.) 4 Press [Start]. The machine begins scanning. NOTE • After printing of the current copy job is complete, the next copy job begins. • If the memory becomes full while scanning, appears in the LCD. When the ADF is used for scanning, the document being scanned stops in the ADF. In this case, open the ADF and gently remove the jammed paper from the ADF. All of the scanned documents will be erased if appears, so divide the document and copy each part separately, or select a lower image quality mode and make copies again. • If the available memory decreases, and are displayed alternatively. If memory space becomes available, the scanning begins again automatically. Also, check that the cassette is not empty. 10 Making Copies Special Features 10-9