Canon FAXPHONE L170 FAXPHONE L180 Basic Guide - Page 52

5 Load the paper stack in the cassette with the print side down. When you load paper with a logo on, position the paper with the print side down (logo side) and load it so that the top of the paper feeds first in the cassette. Paper Handling Make sure the paper stack does not exceed the load limit mark located on the width slide guides. 4 HOOK HOOK LOAD LIMIT MARK HOOK 6 Insert the cassette into the machine. NOTE • If you do not completely insert the cassette into the machine, paper jams may occur. • Do not load paper from the rear of the cassette. 7 Specify the paper size and type. ❑ Press [Menu] ➞ [Set]. ❑ Press [ (-)] or [ (+)] to select ➞ press [Set] twice. ❑ Press [ (-)] or [ (+)] to select the appropriate paper size ➞ press [Set] twice. ❑ Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [Set]. ❑ Press [Stop/Reset] to return to standby mode. IMPORTANT • Do not load different size and type of paper at the same time. • Do not load extra paper when there is still paper left in the cassette. If you load extra paper while printing, remove the loaded paper first. Then put it together with the extra paper and tap the edges. After that, reload it in the cassette. • Do not load paper from the rear of the cassette. NOTE • Select 'ENVELOPE' for envelopes. For details on loading envelopes in the cassette, see "Loading Envelopes in the Cassette," on p. 4-6. • For information on how to use non-standard size paper, see "Loading Paper in the Multi-Purpose Feeder," on p. 4-8, or "Loading an Envelope in the Multi-Purpose Feeder," on p. 4-9. • You must set the paper size and type from the operation panel. Loading Paper 4-5