Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 112

2 Select the preset number you want to add to the tour schedule from the [Preset] selection box, and then click [Add]. The preset is registered in the tour schedule list. Up to 20 presets can be registered. 3 Select a preset in the tour schedule list, and set the preset operation. In [Speed (PT)] and [Speed (Z)], you can set the pan, tilt, and zoom speeds of the preset. In [Pause (sec)], you can enter the number of seconds for the camera to remain stationary at the preset position. When [Preview] is clicked, the camera angle switches to this preset, and the new angle can be checked in the video display area. 4 Click [Change]. When you want to delete changes made to the tour schedule list and restore the settings registered in the camera, click [Restore settings]. 5 Click [Save settings]. When you complete setting the tour schedule list, click [Save settings]. The settings are saved in the camera. Important If preset tour is used, do not use the intelligent function. Note The home position cannot be added to the tour schedule list. 112