Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 41
Setting the Camera Angle
View all Canon VB-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting the Camera Angle (9) [Zoom] slider The slider to operate the zoom ratio. Setting the Camera Angle (10)[Zoom] button The button to operate the zoom ratio. You can operate pan, tilt, rotation and zoom operations to set a desired camera angle. 3 Camera Angle Setting Tool (11)[Control Assist Display] selection box Select whether to [Enable] or [Disable] operation assist in the video display area. (12)[Control Button Display] selection box Select whether to [Enable] or [Disable] the [Pan] button and [Tilt] button in the video display area. (13)[Control Assist Correction] If the control assist display does not match the actual camera angle, click [Control Assist Correction] to confirm the actual camera angle and automatically correct the control assist display position. Control assist correction takes approximately 1 minute. (14)[Digital Zoom] Set digital zoom to [Enable] or [Disable]. If you select [Enable], the digital zoom boundary is displayed for the zoom slider and the digital zoom operation becomes possible. The higher the digital zoom ratio, the lower the image quality becomes. (15)[Image Flip] selection box Select the orientation of the camera image. If [Enable] is selected, the image will be rotated 180 degrees. You can operate zoom operation only. Set Using the Operation Buttons and Sliders Click each of the [Pan], [Tilt], [Rotation] buttons to set the camera angle. Camera angle changes in orientation if the button is held down, and stops when the button is released. Pan (horizontal movement) operation Tilt (vertical movement) operation Rotation (angled movement) operation To set rotation using the [Rotation] slider, drag the slider and release the mouse button when the subject in the image is shown at a level angle. (16)[Focus] You can control the focus. (17)[Exposure Compensation] slider You can control the exposure. Important You must set Intelligent Function detection areas, privacy masks and presets again after changing settings in the Camera Angle Setting Tool. T Note This cannot be set for [Image Stabilizer]. 41