Home » Canon Manuals » Video Cameras » Canon VB-M42 » Manual Viewer

Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 52

Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto, To set [Use DHCPv6], select [Enable] in [IPv6], then

Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

To set [Use DHCPv6], select [Enable] in [IPv6], then select [Enable] in [Auto (DHCPv6)]. (3) [Name Server Address (DHCP)] Select [Use DHCP] or [Use DHCP/DHCPv6] in [AutoSetting of Name Server Address] to display the name server address acquired from the DHCP server. (4) [Name Server Address (DHCPv6)] Select [Use DHCPv6] or [Use DHCP/DHCPv6] in [Auto-Setting of Name Server Address] to display the name server address acquired from the DHCPv6 server. (5) [Host Name] You can register the host name of the camera in the name server. Characters A to Z, a to z, 0 to 9, "-" (hyphen), "_" (underscore) and "." (period) may be used up to 63 (single-byte) characters in length. (6) [Host Name Registration with DDNS] Select [Enable] to register the entered name server address and host name of the camera. (7) [Search Domain] When domain names are specified in the server domain list, search domains in the form "host name + domain name" by specifying the host name for a server, such as the upload server, without specifying a domain name. Enter a domain name and click [Add] to add the domain name to the search domain list. (8) [Search Domain List] A list of domain names added using [Search Domain] appears. The function queries DNS server for each domain name starting from the top of the list. Use the ▲▼ buttons on the right to change the order of the domain names. To delete a domain name, select one from the list and then click [Delete]. Important Do not use "_" (underscore) in [Host Name] and [Search Domain] in Internet Explorer 8/9/10/11. Note • Use [Host Name Registration with DDNS] if the camera IP Address Setting Method is [Auto (DHCP)] (p. 50). DNS server registration settings must be set in advance. Contact your System Administrator for the DNS server settings. • If the name server address 1 is unavailable, the name server address 2 will be accessed. However, the name server address 2 must be set in advance. mDNS (1) [Use mDNS] Set mDNS to [Disable] or [Enable]. If you use mDNS, the IP address and host name of the camera will be broadcast to other hosts on the network. SNMP (1) [Use SNMP v1 and v2c] Set SNMPv1, v2c use to [Disable] or [Enable]. Camera information can be referenced by the SNMP Manager if [Enable] is specified and SNMPv1 or v2c is used. (2) [Use SNMP v3] Set SNMPv3 to [Disable] or [Enable]. Camera information can be referenced by the SNMP Manager if [Enable] is specified and SNMPv3 is used. (3) [Administrator Contact Information] Set contact information (e-mail address, etc.) for the Administrator of the camera. Setting information can be referenced by the SNMP manager. (4) [Administration Function Name] Set the camera name used for administration. Setting information can be referenced by the SNMP manager. If left blank, the following will be used by default: VB-H43 VB-H630VE or VB-H630D VB-H730F VB-M42 VB-M620VE or VB-M620D VB-M720F (5) [Installation Location] Set information regarding the installation location of this camera. Setting information can be referenced by the SNMP manager. SNMP v1 and v2c Server (1) [Community Name] When [Enable] is selected in [SNMPv1, v2c], enter a community name to be used for SNMPv1 and v2c. The default setting is blank. 52

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to Use This Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Common Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (Please refer to the “Administrator Manual”)	17
Operating Environment	18
Camera Angle Setting Tool, Admin Viewer/VB Viewer, Admin Tools	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Making Initial Camera Settings	28
Launch the Camera Management Tool	28
Searching for Cameras and Setting up Networks	28
Set the Password, Date and Time, Camera Name and Video	29
Registering Camera’s IP Address to Trusted Sites	30
Access the Top Page of the Camera to Check Video	31
Access the Top Page from Camera Management Tool	31
Top Page	31
Checking Camera Video	32
Chapter 3 Camera Angle Setting Tool	35
Setting the Camera Angle	36
Launching the Camera Angle Setting Tool	36
Connecting to the Camera	36
Connecting with a Camera List	37
Disconnecting from the Camera, Shutting Down	39
Display Screen of Camera Angle Setting Tool	40
Setting the Camera Angle	41
Setting Focus and Exposure Compensation	42
Creating a Camera Specification File	43
Chapter 4 Setting Page	45
Setting Menu	46
Accessing the Setting Menu	48
Setting Menu	48
Items Common to All Setting Pages	48
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	50
[Date and Time] Setting Date and Time	54
[Camera] Setting Initial Camera Settings and External Device Name	56
[Video] Setting Video Size, Quality and Frame Rate	61
[RTP] Setting RTP Server, Audio Multicast and RTP Streaming	64
[Upload] Setting HTTP/FTP Upload and E-mail Notification	66
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security	69
[Event] Setting Video Record, Volume Detection, External Device Output/Input, Audio Playback and Timer	71
[Access Control] Setting User Access Privileges	75
[IPsec] Setting IPsec	77
[SSL/TLS] Setting HTTP Communication Encryption	80
[802.1X] Network Port Authentication Settings	82
[Memory Card] Memory Card Operations and Settings	84
[Reboot Item] Setting Items Requiring Rebooting	87
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	88
Chapter 5 Admin Tools	91
Admin Tools Overview	92
Admin Tools	92
Privacy Mask Setting Tool	92
Panorama Creation Tool	92
View Restriction Setting Tool	92
Preset Setting Tool	93
Intelligent Function Setting Tool	93
Log Viewer	93
Recorded Video Utility	93
Accessing the Admin Tools	94
Launching the Admin Tools	94
Privacy Mask Setting Tool	95
Display Screen of Privacy Mask Setting Tool	95
Setting the Privacy Mask Area	96
Changing/Deleting a Privacy Mask Area	98
Panorama Creation Tool	99
Display Screens of Panorama Creation Tool	100
Capturing a Panorama Image	100
Saving/Deleting a Panorama Image on the Camera	101
Saving a Panorama Image as Image Files/Opening from Image Files	101
View Restriction Setting Tool	102
Display Screens of View Restriction Setting Tool	103
Setting View Restrictions	104
Preset Setting Tool	106
Display Screens of Preset Setting Tool	107
Setting the Preset	108
Preset Tour	111
Intelligent Function Setting Tool	113
Display Screen of Intelligent Function Setting Tool	116
Flow of Intelligent Function Setting	117
Setting Intelligent Function Detection Settings	119
Log Viewer	125
Display Screens of Log Viewer	125
Downloading Log Files	126
How to View Logs	126
Recorded Video Utility	128
Display Screens of Recorded Video Utility	128
Confirming Recorded Video	129
Narrowing Down the Number of Videos	129
Downloading Video	130
Exporting to Video Files That Can Be Played Back	130
Playing Back Videos	130
Deleting Videos	132
Displaying Memory Card Information	132
Control for Admin	133
Using Control for Admin	133
Chapter 6 Admin Viewer/VB Viewer	135
Overview of Viewer	136
Major Differences Between the Admin Viewer and the VB Viewer	136
User Authorities and Camera Control Privileges	136
Launching the Viewer	138
Launching the Viewer	138
Shutting Down the Viewer	138
Connecting from Admin Tools	138
How to Operate the Viewer	139
Display Screens of Admin Viewer	139
VB Viewer	140
Obtaining Camera Control Privileges	141
Controlling the Camera	142
Magnifying Part of the Image (Viewer PTZ)	145
Cropping and Displaying Part of an Image (Digital PTZ)	146
Setting Video and Audio	147
Checking Information	150
Performing Operations and Settings in the Admin Viewer	151
Transmitting Audio	151
Using Control for Admin	151
Displaying Event Status	158
Recording to an Memory Card Manually	159
Chapter 7 Appendix	161
Memory Card Access	162
Modifiers	164
Troubleshooting	166
List of Log Messages	168
Log Messages on the Camera	168
List of Viewer Messages	178
Messages Displayed in the Information Field	178
Restore Default Settings	180
Restoring the Initial Setting from the Maintenance Page in the Web Browser	180
Restoring Factory Default Settings with the Reset Switch on the Camera	180
List of Factory Default Settings	182

Match case Limit results 1 per page

To set [Use DHCPv6], select [Enable] in [IPv6], then

select [Enable] in [Auto (DHCPv6)].

(3) [Name

erver Address (DHCP)]

Select [Use DHCP] or [Use DHCP/DHCPv6] in [Auto-

Setting of Name Server Address] to display the name

server address acquired from the DHCP server.

(4) [Name

erver Address (DHCPv6)]

Select [Use DHCPv6] or [Use DHCP/DHCPv6] in

[Auto-Setting of Name Server Address] to display the

name server address acquired from the DHCPv6

server.

(5)

[Host Name]

You can register the host name of the camera in the

name server.

Characters A to Z, a to z, 0 to 9, “-” (hyphen), “_”

(underscore) and “.” (period) may be used up to 63

(single-byte) characters in length.

(6)

[Host Name Registration with DDN

]

Select [Enable] to register the entered name server

address and host name of the camera.

(7) [

earch Domain]

When domain names are specified in the server

domain list, search domains in the form “host name +

domain name” by specifying the host name for a

server, such as the upload server, without specifying

a domain name. Enter a domain name and click [Add]

to add the domain name to the search domain list.

(8) [

earch Domain List]

A list of domain names added using [Search Domain]

appears. The function queries DNS server for each

domain name starting from the top of the list.

Use the

▲▼

buttons on the right to change the order

of the domain names.

To delete a domain name, select one from the list and

then click [Delete].

Note

•

Use [Host Name Registration with DDNS] if the camera IP

Address Setting Method is [Auto (DHCP)] (p. 50). DNS server

registration settings must be set in advance. Contact your

System Administrator for the DNS server settings.

•

If the name server address 1 is unavailable, the name server

address 2 will be accessed. However, the name server

address 2 must be set in advance.

mDNS

(1)

[Use mDN

]

Set mDNS to [Disable] or [Enable]. If you use mDNS,

the IP address and host name of the camera will be

broadcast to other hosts on the network.

SNMP

(1) [Use

NMP v1 and v2c]

Set SNMPv1, v2c use to [Disable] or [Enable].

Camera information can be referenced by the SNMP

Manager if [Enable] is specified and SNMPv1 or v2c

is used.

(2) [Use

NMP v3]

Set SNMPv3 to [Disable] or [Enable].

Camera

information can be referenced by the SNMP Manager

if [Enable] is specified and SNMPv3 is used.

(3)

[Administrator Contact Information]

Set contact information (e-mail address, etc.) for the

Administrator of the camera. Setting information can

be referenced by the SNMP manager.

(4)

[Administration Function Name]

Set the camera name used for administration. Setting

information can be referenced by the SNMP manager.

If left blank, the following will be used by default:

VB-H43

VB-H630VE or VB-H630D

VB-H730F

VB-M42

VB-M620VE or VB-M620D

VB-M720F

(5)

[Installation Location]

Set information regarding the installation location of

this camera. Setting information can be referenced by

the SNMP manager.

SNMP v1 and v2c Server

(1)

[Community Name]

When [Enable] is selected in [SNMPv1, v2c], enter a

community name to be used for SNMPv1 and v2c.

The default setting is blank.

Important

Do not use “_” (underscore) in [Host Name] and [Search

Domain] in Internet Explorer 8/9/10/11.