Home » Canon Manuals » Video Cameras » Canon VB-M42 » Manual Viewer

Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 147

Setting Video and Audio, Using a Preset or the Home Position

Add to My Manuals
Save this manual to your list of manuals

Page 147 highlights

How to Operate the Viewer control privileges, the preview frame turns yellow and you „ Using a Preset or the Home Position can use the following procedures to resize and move it. You can use a registered preset or home position to specify the range for Digital PTZ. „ Changing the Size You can resize the preview frame by dragging it. The preview frame turns blue during dragging. The image inside the frame is displayed in the video display area in accordance with the size of the frame. Click the preset selection box and select a preset from the displayed list to move the preview frame on the Digital PTZ panel to the preset position and display the image inside the frame in the video display area. Click the [Home Position] button to move the preview frame on the Digital PTZ panel to the home position and display the image inside the frame in the video display area. Note 6 Register the preset or home position beforehand using the Preset Setting Tool (p. 108). Registered presets will appear in the preset selection box. Admin Viewer/VB Viewer „ Exiting Digital PTZ Click the [Digital PTZ] button again. The Digital PTZ panel closes and Digital PTZ ends. Although clicking the close button of the Digital PTZ panel closes the Digital PTZ panel, Digital PTZ will stay on. However, when you reconnect to Viewer, the initial status will be restored. The preview frame size can be set to any of five sizes (the changed size is displayed under [Video Size] on the digital PTZ panel). The sizes that can be selected depend on the [Video Size Set] setting under [Video] > [All Videos] on the Setting page (p. 61). If the aspect ratio of the set [Video Size Set] is 16:9, the five sizes are 640 x 360, 512 x 288, 384 x 216, 256 x 144, and 128 x 72. If the aspect ratio is 4:3, the five sizes are 640 x 480, 512 x 384, 384 x 288, 256 x 192, and 128 x 96. „ Changing the Position You can move the preview frame by dragging the inside of the frame. If you click any position in the Digital PTZ display area, the preview frame moves to the clicked position. Note The preview frame moves in stages. You cannot finely adjust the position. „ Specifying a Range with the Sliders You can use the pan, tilt, and zoom sliders for the video display area to specify the cropping range in the video display area. The preview frame on the Digital PTZ panel also moves in accordance with the operation of the pan, tilt, and zoom sliders. Setting Video and Audio „ Changing the Video Size You can set a desired video size for video received from the camera. The sizes that can be selected depend on the [Video Size Set] setting under [Video] > [All Videos] on the Setting page (p. 61). 147

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to Use This Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Common Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (Please refer to the “Administrator Manual”)	17
Operating Environment	18
Camera Angle Setting Tool, Admin Viewer/VB Viewer, Admin Tools	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Making Initial Camera Settings	28
Launch the Camera Management Tool	28
Searching for Cameras and Setting up Networks	28
Set the Password, Date and Time, Camera Name and Video	29
Registering Camera’s IP Address to Trusted Sites	30
Access the Top Page of the Camera to Check Video	31
Access the Top Page from Camera Management Tool	31
Top Page	31
Checking Camera Video	32
Chapter 3 Camera Angle Setting Tool	35
Setting the Camera Angle	36
Launching the Camera Angle Setting Tool	36
Connecting to the Camera	36
Connecting with a Camera List	37
Disconnecting from the Camera, Shutting Down	39
Display Screen of Camera Angle Setting Tool	40
Setting the Camera Angle	41
Setting Focus and Exposure Compensation	42
Creating a Camera Specification File	43
Chapter 4 Setting Page	45
Setting Menu	46
Accessing the Setting Menu	48
Setting Menu	48
Items Common to All Setting Pages	48
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	50
[Date and Time] Setting Date and Time	54
[Camera] Setting Initial Camera Settings and External Device Name	56
[Video] Setting Video Size, Quality and Frame Rate	61
[RTP] Setting RTP Server, Audio Multicast and RTP Streaming	64
[Upload] Setting HTTP/FTP Upload and E-mail Notification	66
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security	69
[Event] Setting Video Record, Volume Detection, External Device Output/Input, Audio Playback and Timer	71
[Access Control] Setting User Access Privileges	75
[IPsec] Setting IPsec	77
[SSL/TLS] Setting HTTP Communication Encryption	80
[802.1X] Network Port Authentication Settings	82
[Memory Card] Memory Card Operations and Settings	84
[Reboot Item] Setting Items Requiring Rebooting	87
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	88
Chapter 5 Admin Tools	91
Admin Tools Overview	92
Admin Tools	92
Privacy Mask Setting Tool	92
Panorama Creation Tool	92
View Restriction Setting Tool	92
Preset Setting Tool	93
Intelligent Function Setting Tool	93
Log Viewer	93
Recorded Video Utility	93
Accessing the Admin Tools	94
Launching the Admin Tools	94
Privacy Mask Setting Tool	95
Display Screen of Privacy Mask Setting Tool	95
Setting the Privacy Mask Area	96
Changing/Deleting a Privacy Mask Area	98
Panorama Creation Tool	99
Display Screens of Panorama Creation Tool	100
Capturing a Panorama Image	100
Saving/Deleting a Panorama Image on the Camera	101
Saving a Panorama Image as Image Files/Opening from Image Files	101
View Restriction Setting Tool	102
Display Screens of View Restriction Setting Tool	103
Setting View Restrictions	104
Preset Setting Tool	106
Display Screens of Preset Setting Tool	107
Setting the Preset	108
Preset Tour	111
Intelligent Function Setting Tool	113
Display Screen of Intelligent Function Setting Tool	116
Flow of Intelligent Function Setting	117
Setting Intelligent Function Detection Settings	119
Log Viewer	125
Display Screens of Log Viewer	125
Downloading Log Files	126
How to View Logs	126
Recorded Video Utility	128
Display Screens of Recorded Video Utility	128
Confirming Recorded Video	129
Narrowing Down the Number of Videos	129
Downloading Video	130
Exporting to Video Files That Can Be Played Back	130
Playing Back Videos	130
Deleting Videos	132
Displaying Memory Card Information	132
Control for Admin	133
Using Control for Admin	133
Chapter 6 Admin Viewer/VB Viewer	135
Overview of Viewer	136
Major Differences Between the Admin Viewer and the VB Viewer	136
User Authorities and Camera Control Privileges	136
Launching the Viewer	138
Launching the Viewer	138
Shutting Down the Viewer	138
Connecting from Admin Tools	138
How to Operate the Viewer	139
Display Screens of Admin Viewer	139
VB Viewer	140
Obtaining Camera Control Privileges	141
Controlling the Camera	142
Magnifying Part of the Image (Viewer PTZ)	145
Cropping and Displaying Part of an Image (Digital PTZ)	146
Setting Video and Audio	147
Checking Information	150
Performing Operations and Settings in the Admin Viewer	151
Transmitting Audio	151
Using Control for Admin	151
Displaying Event Status	158
Recording to an Memory Card Manually	159
Chapter 7 Appendix	161
Memory Card Access	162
Modifiers	164
Troubleshooting	166
List of Log Messages	168
Log Messages on the Camera	168
List of Viewer Messages	178
Messages Displayed in the Information Field	178
Restore Default Settings	180
Restoring the Initial Setting from the Maintenance Page in the Web Browser	180
Restoring Factory Default Settings with the Reset Switch on the Camera	180
List of Factory Default Settings	182

Match case Limit results 1 per page

How to Operate the Viewer

147

Admin Viewer/VB Viewer

control privileges, the preview frame turns yellow and you

can use the following procedures to resize and move it.

Changing the Size

You can resize the preview frame by dragging it. The

preview frame turns blue during dragging. The image

inside the frame is displayed in the video display area in

accordance with the size of the frame.

The preview frame size can be set to any of five sizes (the

changed size is displayed under [Video Size] on the

digital PTZ panel).

The sizes that can be selected depend on the [Video Size

Set] setting under [Video] > [All Videos] on the Setting

page (p. 61).

If the aspect ratio of the set [Video Size Set] is 16:9, the

five sizes are 640 x 360, 512 x 288, 384 x 216, 256 x 144,

and 128 x 72. If the aspect ratio is 4:3, the five sizes are

640 x 480, 512 x 384, 384 x 288, 256 x 192, and 128 x 96.

Changing the Position

You can move the preview frame by dragging the inside

of the frame.

If you click any position in the Digital PTZ display area, the

preview frame moves to the clicked position.

Note

The preview frame moves in stages. You cannot finely adjust the

position.

Specifying a Range with the Sliders

You can use the pan, tilt, and zoom sliders for the video

display area to specify the cropping range in the video

display area. The preview frame on the Digital PTZ panel

also moves in accordance with the operation of the pan,

tilt, and zoom sliders.

Using a Preset or the Home Position

You can use a registered preset or home position to

specify the range for Digital PTZ.

Click the preset selection box and select a preset from the

displayed list to move the preview frame on the Digital

PTZ panel to the preset position and display the image

inside the frame in the video display area.

Click the [Home Position] button to move the preview

frame on the Digital PTZ panel to the home position and

display the image inside the frame in the video display

area.

Note

Setting Tool (p. 108). Registered presets will appear in the preset

selection box.

Exiting Digital PTZ

Click the [Digital PTZ] button again. The Digital PTZ panel

closes and Digital PTZ ends.

Although clicking the close button of the Digital PTZ panel

closes the Digital PTZ panel, Digital PTZ will stay on.

However, when you reconnect to Viewer, the initial status

will be restored.

Setting Video and Audio

Changing the Video Size

You can set a desired video size for video received from

the camera.

The sizes that can be selected depend on the [Video Size

Set] setting under [Video] > [All Videos] on the Setting

page (p. 61).