Home » Canon Manuals » Video Cameras » Canon VB-M42 » Manual Viewer

Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 70

FTP Server, WS-Security, Set the microphone input. Select [Line In]

Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

(6) [Echo Canceller] If [Enable] is selected, echo between the microphone and speaker is suppressed. This setting is available only when [Audio Transmission from the Camera] is set to [Enable] and [Audio Reception from Viewer] is set to [Enable]. (7) [Audio Input] Set the microphone input. Select [Line In], [Microphone In (dynamic microphone)] or [Microphone In (condenser microphone)]. Caution Switch line in and microphone in on each setting page according to the specification of the microphone (p. 70). Using the wrong input may damage the camera and/or microphone. Be sure to configure settings correctly. Important • Video and audio can be distributed to up to 30 clients. However, when there are many clients or they are connected to the camera over an SSL connection, the video frame rate may slow down and the sound may drop out if audio reception from the camera is enabled. • The volume, sound quality, etc., may change depending on the characteristics of the microphone used. • If [Input Volume] or [Echo Canceller] settings are changed after setting volume detection, check the detection setting again. • Connect a speaker with amplifier to the camera ("Installation Guide" > "Audio Input/Output Terminals"). • If [Enable] is selected under [Echo Canceller], the sound quality or volume may be affected. Utilize this function as necessary according to the installation environment and how the camera is used. • The video and audio may not be synchronized. • The audio may be temporarily interrupted, depending on the performance of the computer and the network environment. • The audio may be interrupted if anti-virus software is enabled. • Communication may be temporarily interrupted, cutting off the audio, if the LAN cable is unplugged and plugged in again. If this occurs, reconnect from the Viewer. (2) [HTTP Port] Set the HTTP port number to 80 or in the range of 1024 to 65535. Normally [80] (factory default setting) is used. (3) [HTTPS Port] Set the HTTPS port number to 443 or in the range of 1024 to 65535. Normally [443] (factory default setting) is used. Important If the setting of [HTTP Port] or [HTTPS Port] is changed, the camera may become inaccessible from the active web browser. Check beforehand the precautions in "Important" in "[Reboot Item] Setting Items Requiring Rebooting" (p. 87). FTP Server (1) [Use FTP Server] Set FTP Server to [Disable] or [Enable]. WS-Security (1) [Check Time on Authentication] Select whether to check the time information in data sent from the client by selecting [Check] or [Do not check]. HTTP Server (1) [Authentication Method] Set the authentication method used with the HTTP server to [Basic Authentication] or [Digest Authentication]. 70

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to Use This Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Common Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (Please refer to the “Administrator Manual”)	17
Operating Environment	18
Camera Angle Setting Tool, Admin Viewer/VB Viewer, Admin Tools	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Making Initial Camera Settings	28
Launch the Camera Management Tool	28
Searching for Cameras and Setting up Networks	28
Set the Password, Date and Time, Camera Name and Video	29
Registering Camera’s IP Address to Trusted Sites	30
Access the Top Page of the Camera to Check Video	31
Access the Top Page from Camera Management Tool	31
Top Page	31
Checking Camera Video	32
Chapter 3 Camera Angle Setting Tool	35
Setting the Camera Angle	36
Launching the Camera Angle Setting Tool	36
Connecting to the Camera	36
Connecting with a Camera List	37
Disconnecting from the Camera, Shutting Down	39
Display Screen of Camera Angle Setting Tool	40
Setting the Camera Angle	41
Setting Focus and Exposure Compensation	42
Creating a Camera Specification File	43
Chapter 4 Setting Page	45
Setting Menu	46
Accessing the Setting Menu	48
Setting Menu	48
Items Common to All Setting Pages	48
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	50
[Date and Time] Setting Date and Time	54
[Camera] Setting Initial Camera Settings and External Device Name	56
[Video] Setting Video Size, Quality and Frame Rate	61
[RTP] Setting RTP Server, Audio Multicast and RTP Streaming	64
[Upload] Setting HTTP/FTP Upload and E-mail Notification	66
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security	69
[Event] Setting Video Record, Volume Detection, External Device Output/Input, Audio Playback and Timer	71
[Access Control] Setting User Access Privileges	75
[IPsec] Setting IPsec	77
[SSL/TLS] Setting HTTP Communication Encryption	80
[802.1X] Network Port Authentication Settings	82
[Memory Card] Memory Card Operations and Settings	84
[Reboot Item] Setting Items Requiring Rebooting	87
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	88
Chapter 5 Admin Tools	91
Admin Tools Overview	92
Admin Tools	92
Privacy Mask Setting Tool	92
Panorama Creation Tool	92
View Restriction Setting Tool	92
Preset Setting Tool	93
Intelligent Function Setting Tool	93
Log Viewer	93
Recorded Video Utility	93
Accessing the Admin Tools	94
Launching the Admin Tools	94
Privacy Mask Setting Tool	95
Display Screen of Privacy Mask Setting Tool	95
Setting the Privacy Mask Area	96
Changing/Deleting a Privacy Mask Area	98
Panorama Creation Tool	99
Display Screens of Panorama Creation Tool	100
Capturing a Panorama Image	100
Saving/Deleting a Panorama Image on the Camera	101
Saving a Panorama Image as Image Files/Opening from Image Files	101
View Restriction Setting Tool	102
Display Screens of View Restriction Setting Tool	103
Setting View Restrictions	104
Preset Setting Tool	106
Display Screens of Preset Setting Tool	107
Setting the Preset	108
Preset Tour	111
Intelligent Function Setting Tool	113
Display Screen of Intelligent Function Setting Tool	116
Flow of Intelligent Function Setting	117
Setting Intelligent Function Detection Settings	119
Log Viewer	125
Display Screens of Log Viewer	125
Downloading Log Files	126
How to View Logs	126
Recorded Video Utility	128
Display Screens of Recorded Video Utility	128
Confirming Recorded Video	129
Narrowing Down the Number of Videos	129
Downloading Video	130
Exporting to Video Files That Can Be Played Back	130
Playing Back Videos	130
Deleting Videos	132
Displaying Memory Card Information	132
Control for Admin	133
Using Control for Admin	133
Chapter 6 Admin Viewer/VB Viewer	135
Overview of Viewer	136
Major Differences Between the Admin Viewer and the VB Viewer	136
User Authorities and Camera Control Privileges	136
Launching the Viewer	138
Launching the Viewer	138
Shutting Down the Viewer	138
Connecting from Admin Tools	138
How to Operate the Viewer	139
Display Screens of Admin Viewer	139
VB Viewer	140
Obtaining Camera Control Privileges	141
Controlling the Camera	142
Magnifying Part of the Image (Viewer PTZ)	145
Cropping and Displaying Part of an Image (Digital PTZ)	146
Setting Video and Audio	147
Checking Information	150
Performing Operations and Settings in the Admin Viewer	151
Transmitting Audio	151
Using Control for Admin	151
Displaying Event Status	158
Recording to an Memory Card Manually	159
Chapter 7 Appendix	161
Memory Card Access	162
Modifiers	164
Troubleshooting	166
List of Log Messages	168
Log Messages on the Camera	168
List of Viewer Messages	178
Messages Displayed in the Information Field	178
Restore Default Settings	180
Restoring the Initial Setting from the Maintenance Page in the Web Browser	180
Restoring Factory Default Settings with the Reset Switch on the Camera	180
List of Factory Default Settings	182

Match case Limit results 1 per page

(6)

[Echo Canceller]

If [Enable] is selected, echo between the microphone

and speaker is suppressed.

This setting is available only when [Audio

Transmission from the Camera] is set to [Enable] and

[Audio Reception from Viewer] is set to [Enable].

(7)

[Audio Input]

Set the microphone input. Select [Line In],

[Microphone In (dynamic microphone)] or

[Microphone In (condenser microphone)].

HTTP Server

(1)

[Authentication Method]

Set the authentication method used with the HTTP

server to [Basic Authentication] or [Digest

Authentication].

(2)

[HTTP Port]

Set the HTTP port number to 80 or in the range of

1024 to 65535.

Normally [80] (factory default setting) is used.

(3) [HTTP

Port]

Set the HTTPS port number to 443 or in the range of

1024 to 65535.

Normally [443] (factory default setting) is used.

FTP Server

(1)

[Use FTP

erver]

Set FTP Server to [Disable] or [Enable].

WS-Security

(1)

[Check Time on Authentication]

Select whether to check the time information in data

sent from the client by selecting [Check] or [Do not

check].

Caution

witch line in and microphone in on each setting page

according to the specification of the microphone (p. 70).

Using the wrong input may damage the camera and/or

microphone. Be sure to configure settings correctly.

Important

•

Video and audio can be distributed to up to 30 clients.

However, when there are many clients or they are connected

to the camera over an SSL connection, the video frame rate

may slow down and the sound may drop out if audio

reception from the camera is enabled.

•

The volume, sound quality, etc., may change depending on

the characteristics of the microphone used.

•

If [Input Volume] or [Echo Canceller] settings are changed after

setting volume detection, check the detection setting again.

•

Connect a speaker with amplifier to the camera (“Installation

Guide” > “Audio Input/Output Terminals”).

•

If [Enable] is selected under [Echo Canceller], the sound

quality or volume may be affected. Utilize this function as

necessary according to the installation environment and how

the camera is used.

•

The video and audio may not be synchronized.

•

The audio may be temporarily interrupted, depending on the

performance of the computer and the network environment.

•

The audio may be interrupted if anti-virus software is

enabled.

•

Communication may be temporarily interrupted, cutting off

the audio, if the LAN cable is unplugged and plugged in

again. If this occurs, reconnect from the Viewer.

Important

If the setting of [HTTP Port] or [HTTPS Port] is changed, the

camera may become inaccessible from the active web

browser. Check beforehand the precautions in “Important” in

“[Reboot Item] Setting Items Requiring Rebooting” (p. 87).