Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 65
Audio Transmission], distribution is confined to the local segment only
View all Canon VB-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
distribution is confined to the local segment only and cannot be distributed by the router. (6) [Audio Transmission] Set RTP streaming audio transmission to [Disable] or [Enable]. Note • RTP stream URL rtsp://IP_address:port_number/rtpstream/config1(~5)=r|u|m [=r|u|m] is optional and can be omitted. If specified, specify only one option. r: Requests RTP over TCP u: Requests RTP over UDP m: Requests multicast Example: RTP streaming 1 request using RTP over TCP rtsp://192.168.100.1:554/rtpstream/config1=r Note that the actual operation is dependent on the RTP client application, so the URL does not necessarily specify the method used for transmission. • For H.264, the bit rate control and video quality are determined by the settings in [Video] (p. 62). • Regardless of the [Server] > [Audio Server] > [Audio Transmission from the Camera] setting, RTP streaming audio will be used. However, to use audio settings, select [Enable] for [Audio Transmission from the Camera] and make the settings. • The [Access Control] > [User Authority] > [Video Distribution] and [Audio Distribution] settings are not used for RTP. • RTP streaming video may not be viewable on systems using a proxy server or firewall. If the video cannot be viewed, contact the system administrator. • If host access restrictions are applied to a client while it is streaming using RTP over UDP, it may take from a few to several seconds until streaming ceases. [RTP] Setting RTP Server, Audio Multicast and RTP Streaming 4 Setting Page 65