Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 53
SNMP v3 Server, User Name], ecurity Level], Authentication Algorithm], Authentication Password]
View all Canon VB-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc SNMP v3 Server (1) [User Name] When [Enable] is selected in [SNMPv3], set the user name for using SNMPv3. (2) [Security Level] Select [No authentication and no encryption], 4 [Authentication but no encryption] or [Authentication and encryption] for the SNMPv3 security level. Setting Page (3) [Authentication Algorithm] When [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], select [MD5] or [SHA1] for the authentication algorithm. (4) [Authentication Password] When [Authentication but no encryption] or [Authentication and encryption] is selected for [Security Level], set the authentication password. (5) [Encryption Algorithm] When [Authentication and encryption] is selected for [Security Level], select [DES] or [AES] for the encryption algorithm. (6) [Encryption Password] When [Authentication and encryption] is selected for [Security Level], set the encryption password. Note • The information set in the camera is read-only from the SNMP manager. • Use the SNMP Manager that supports SNMP MIB2 (supporting RFC1213). 53