Canon VB-M42 Network Camera VB-H43/VB-H630VE/VB-H630D/VB-H730F/VB-M42/VB-M620V - Page 74
Sound Clip Upload, Select [Switch to Day Mode] to switch to Day Mode
View all Canon VB-M42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
(1) [Timer Event] Select [Disable] or [Enable] for timer event. (2) [Start Time] Set the start time of the timer event in 24-hour format. (3) [End Time] Set the end time of the timer event in the 24-hour format. (4) [Repeat Interval] Select [1 sec.] [5 sec.] [10 sec.] [30 sec.] [1 min.] [5 min.] [10 min.] [15 min.] [20 min.] [30 min.] [1 hour] [3 hours] [6 hours] or [12 hours] for the timer event repeat intervals. Select [None] if an operation need not be repeated. (5) [Video Record] Specify the video record action. When [Enable] is selected, video will be transmitted to the destination selected in [Video Record Action] (p. 71) when a timer event occurs. (6) [E-mail Notification] Select the e-mail notification operation to be performed. If [Enable] is selected, e-mail notification is performed when a timer event occurs. To use this function, [Upload] > [E-mail Notification] must also be set (p. 68). (7) [External Device Output] Select whether external device output (1 or 2) is active or inactive when a timer event occurs. Select [Disable] to disable output to an external device. (8) [Day/Night Mode Switching] Select the Day/Night Mode switching behavior when a timer event is triggered. Select [Switch to Day Mode] to switch to Day Mode at the start time, and Night Mode at the end time. Select [Switch to Night Mode] to switch to Night Mode at the start time, and Day Mode at the end time. Select [Disable] to disable Day/Night Mode switching. Important • [Day/Night Mode Switching] can only be set in [Timer 1]. • [External Device Output] and [Day/Night Mode Switching] do not support [Repeat Interval]. • When [Day/Night] in the Admin Viewer is set to [Auto], Day/ Night Mode switching will not happen when a timer event is triggered (p. 155). • If the [Day/Night Mode Switching] settings switch Day/Night Mode while the Admin Viewer/VB Viewer is assigned camera control, control will be released. Example: Timer [Timer 1] [Timer 2] [Start Time] 0:00 12:00 [End Time] 12:00 0:00 [Repeat Interval] 10 sec 10 sec Sound Clip Upload (1) [Browse File] Specify the audio file you want to register as the sound clip, and then click [Add]. (2) [Sound Clip Name] Set a name for the audio file to be registered as sound playback (up to 15 alphanumeric characters). If a blank field is applied, the sound clip will be deleted. To delete a registered audio file, click [Delete] next to the sound clip name you want to delete. Note Audio files must be 20 seconds or shorter and must be ".wav" files (µ-law PCM 8 bits sampling frequency 8000 Hz, monaural). Audio file samples are provided in the SOUND folder on the Setup CD-ROM. Note When using timers that run continuously for 24 hours with a [Repeat Interval] of 30 seconds or less, set the timer start and end times so the timers can run continuously. 74