Canon XL-H1 XL H1 Instruction Manual - Page 144
Troubleshooting - service manual
UPC - 086753092998
View all Canon XL-H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Camcorder will not turn on. The camcorder switches off by itself. Viewfinder switches on and off. Cause Solution Battery pack is not correctly attached. Attach the battery pack correctly. 16 Power save function has been Turn on the camcorder. 43 activated. Battery pack is exhausted. Replace or charge the battery pack. 16 Recording/Playback Buttons will not work. Cassette is not loaded. Load a cassette. 29 " " flashes on the screen. Condensation is detected. See reference page. 139 "REMOVE THE CASSETTE" Camcorder stopped operating to Unload and reload the cassette. 29 appears on the screen. protect the tape. The wireless controller will not Camcorder and wireless controller Change the remote sensor modes. 109 work. are not set to the same remote sensor mode. Batteries of the wireless controller Replace the batteries. 28 are exhausted. Abnormal characters appear on the This camcorder uses a Disconnect the power source and - screen. The camcorder does not operate properly. microcomputer. External noise or reconnect it after a short time. If the static electricity may cause abnormal problem still persists, disconnect the characters to appear on the screen. power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. Recording The POWER dial is not in the OFF The [LED ON/OFF] option is set to Set the [LED ON/OFF] option to 96 position but the POWER indicator [OFF]. [ON]. is off. Image will not appear on the screen. The POWER dial is not set to a recording program. Set the POWER dial to a recording 42 program. "SET THE TIME ZONE, DATE AND Time zone, date and time are not set, Set the time zone, date and time. If 41 TIME" appears on the screen. or the built-in rechargeable lithium necessary, power the camcorder battery is exhausted. with the compact power adapter and leave it connected with the POWER dial set to OFF for at least 24 hours to recharge the built-in battery before making the settings. Pressing the start/stop button will Cassette is not loaded. Load a cassette. 29 not start recording. The POWER dial is not set to a Set the POWER dial to a recording 42 recording program. program. The lock lever on the carrying handle Slide the lock lever to the left and 43 is activated. deactivate it. Camcorder will not focus. Autofocus does not work on that Focus manually. 53 subject. Viewfinder is not adjusted. Adjust the viewfinder with the 21 dioptric adjustment lever. Lens is dirty. Clean the lens. 137 The tally lamp will not light up. [TALLY LAMP] is set to [OFF] in the Set [TALLY LAMP] to [ON] or 97 menu. [BLINK]. 144