Canon XL-H1 XL H1 Instruction Manual - Page 64
Using the Wind Screen, Recording on Channels 1 and 2
UPC - 086753092998
View all Canon XL-H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using the Wind Screen With the supplied microphone (only), you can reduce the sound of wind recorded from the front microphone. MENU ( 31) AUDIO SETUP WIND SCREEN•••ON Open the menu and select [AUDIO SETUP]. Select [WIND SCREEN], select a setting option and close the menu. Recording on Channels 1 and 2 Select the audio input from FRONT MIC (supplied microphone), AUDIO1 (RCA terminals) or REAR (XLR terminals). Refer also to the Audio Block Diagram ( 157). When Using the Front Microphone Set the INPUT SELECT switch to FRONT MIC. • You can select the microphone setting with the STEREO/MONO switch on the microphone itself. In the MONO position, the same monaural audio signal will be recorded on channels 1 and 2. • If necessary, turn on the microphone attenuator (20 dB) by setting the FRONT MIC ATT. switch to ATT. When Connecting to the RCA terminals of AUDIO1 (Line-in Recording) 1. Connect the device to the RCA terminals of AUDIO1. 2. Set the INPUT SELECT switch to AUDIO1. 64