Canon XL-H1 XL H1 Instruction Manual - Page 44
Screen Displays during Recording
UPC - 086753092998
View all Canon XL-H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Screen Displays during Recording Time code You can select between drop frame or non-drop frame time code ( 58). Remaining tape Indicates the remaining time of the tape in minutes. " END" flashes when the tape reaches the end. • When the time left is less than 15 seconds, the remaining tape time may not appear. • Depending on the tape, the indication may not be displayed correctly. Remaining battery charge The battery symbol indicates the charge status of the battery pack. • " " starts flashing in red when the battery pack is empty. • When you attach an empty battery pack, the power may turn off without displaying " ". • The actual battery charge may not be indicated accurately depending on the condition under which the battery pack and camcorder are used. SHUTTER lamp Lights up when the shutter speed is changed from the following: 60i 1/60 of a second 30F 1/30 of a second 24F 1/48 of a second 1/60 of a second REC lamp Lights up during recording. The REC lamp starts flashing when the remaining tape is less than 5 minutes (it does not flash when the remaining tape information is not displayed on the screen.) GAIN lamp Lights up when the AGC (auto gain control) is set to -3 dB or +3 dB or higher. 44