Canon i475D i475D Direct Printing Guide - Page 36
Important, Resetting the Ink Counter in the Maintenance Mode
![]() |
View all Canon i475D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Replacing an Ink Tank 5 Reset the ink counter. Important After replacing an ink tank, be sure to reset the ink counter with the front cover open. The remaining ink volume display on the operation panel is displayed properly only if the ink counter is reset. (1) Using (cursor buttons), locate above the ink tank you replaced. (2) Press the OK button. A full ink tank icon appears under and the ink counter is reset. Note If you have replaced both black and color ink tanks, press the cursor buttons and after both ink tanks have the mark set above them, press the OK button. 6 Close the front cover. Note Resetting the Ink Counter in the Maintenance Mode If you have closed the front cover after replacing an ink tank, reset the ink counter in the maintenance mode as described below. 1. Press the Maintenance button. 2. Press four times to display 05. Next, press the OK button. Then, appears above the ink tank on the operation panel. 3. Using the cursor buttons, locate above the replaced ink tank. Next, press the OK button. A full ink tank icon appears under and the counter is reset. If you have replaced both black and color ink tanks, reset the ink counters of both ink tanks in the same manner as above. 4. Press the Maintenance button. Now you are finished with resetting of the ink counter. 36
![](/manual_guide/products/canon-475d-i475d-direct-printing-guide-3b55a66/36.png)