Canon imageCLASS D340 imageCLASS D320/D340 Basic Guide - Page 56

and gently slide

Page 56 highlights

7 Hold the cartridge and position the arrow mark on the cartridge towards the inside of the machine shown below. 8 Align the projections on both sides of the cartridge to the guides in the machine (location x) and gently slide the cartridge into the machine until the right cover slightly rises up (location y). • The right cover moves simultaneously with IMPORTANT the action of the cartridge. Do not push the cartridge farther than location y. Doing so will result in catching your hand in the right cover. 9 Close the right cover and the cartridge will be set in place (location z). 7 Maintenance • If the LCD displays INSTALL NOTE CARTRIDGE, reset the machine by opening the right cover and then closing it. 7-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

7-7
Maintenance
7
7
Hold the cartridge and position the arrow
mark on the cartridge towards the inside of
the machine shown below.
8
Align the projections
on both sides of
the cartridge to the guides
in the
machine (location
) and gently slide the
cartridge into the machine until the right
cover slightly rises up (location
).
The right cover moves simultaneously with
the action of the cartridge. Do not push the
cartridge farther than location
. Doing so
will result in catching your hand in the
right cover.
9
Close the right cover and the cartridge will
be set in place (location
).
If the LCD displays
INSTALL
CARTRIDGE
, reset the machine by opening
the right cover and then closing it.
NOTE
IMPORTANT