Canon imagePROGRAF PRO-1000 series User Manual - Page 124
Loading Paper in the Manual Feed Tray
View all Canon imagePROGRAF PRO-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Loading Paper in the Manual Feed Tray You can load one sheet of 8" x 10" (20 x 25 cm) size paper or larger in the manual feed tray at a time. Note • The manual feed tray accepts the following page sizes. • A4, A3, A3+, A2 • B4, B3 • Letter, Legal • 8" x 10" (20 x 25 cm), 10" x 12" (25 x 30 cm), 11" x 17" (28 x 43 cm), 14" x 17" (36 x 43 cm), 17" x 22" (43 x 56 cm) • We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Media Types You Can Use. • Print in an environment (temperature and humidity) suitable to the paper in use. For the temperature and humidity conditions of Canon genuine papers, refer to the paper's packaging or the supplied instructions. • The manual feed tray does not accept plain paper. When printing on plain paper, load it in the rear tray. • When printing on paper from a PictBridge (Wireless LAN) compliant device, load paper in the rear tray. Printing from Digital Camera 1. Prepare paper. If paper is curled, flatten it. Note • If paper is curled, hold the curled corners and gently bend them in the opposite direction until the paper becomes completely flat. For details on how to flatten curled paper, see "Load the paper after correcting its curl." in Paper Is Smudged / Printed Surface Is Scratched. • When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality. 2. Open the manual feed tray (A), then extend the paper support (B) and the paper support extension (C). 3. Open the paper output tray (D) gently. 4. Open the output tray extension (E), then pull out the paper output support (F). 124