Canon imagePROGRAF PRO-1000 series User Manual - Page 406

Quality & Media This dialog allows you to create a basic print setup in accordance with the paper type. Unless special printing is required, normal printing can be performed just by setting the items in this dialog. Media Type Select the type of media to be used. You must select the type of media actually loaded in the printer. This selection enables the printer to carry out printing properly for the material of the media used. Note • When printing on a double postcard, select Postcard Double for Paper Size, and then print again. • If you print on paper other than hagaki, load the paper according to usage instructions, and then click OK. • If is displayed, start up the Canon IJ Printer Utility2 and either correct or update media information. Paper Source Select the source from which paper is supplied. Manual Feed Paper is supplied from the manual feed tray in the back. Rear Tray Paper is fed from the rear tray. Print Quality Select the one that is closest to the original document type and the purpose. When one of the radio buttons is selected, the appropriate quality will be set automatically. Highest Prints with quality as the highest priority. High Gives priority to print quality over printing speed. Standard Prints with average speed and quality. Custom Select this radio button to specify a quality. 406