Canon imagePROGRAF PRO-1000 series User Manual - Page 411

Paper Detailed Settings Use this dialog box to set detailed print settings that match the media type loaded on the printer. If the paper becomes stained during printing or if the quality of the print results is less than expected, using these settings may improve the print results. Drying Time Allows you to set how long the printer rests before printing of the next page starts. If the next page is ejected before the print surface dries completely and the paper becomes stained, set a longer ink drying wait time. Print Head Height Allows you to widen the gap between the print head and the paper to reduce paper abrasion when printing high density pages. To reduce paper abrasion, select Avoid Paper Abrasion. Paper Vacuum Allows you to change the paper vacuum pressure to be applied during printing. If stains form on the back surface of the paper when you print on thick paper or paper prone to curling or crinkling, use this function to change the paper vacuum pressure. Unidirectional Printing Suppresses uneven coloring and line shifts during printing. To perform unidirectional printing, check this check box. Calibration Value Allows you to apply the results of calibration performed on the printer. To apply calibration values, select Use Value. Clear Coating Area Set the clear coating area. Auto The printer automatically sets the areas to be clear-coated and whether clear coating is to be executed. It may be possible to reduce the ink consumption of the chroma optimizer (CO) or to accelerate the print speed. 411