Canon imagePROGRAF PRO-1000 series User Manual - Page 490

2. Select Yes on displayed screen and press OK button. 3. Use button to select Manual address and press OK button. 4. Use button to select Use and press OK button. 5. Use button to select IP address and press OK button. 6. Enter IP address. Enter 8 number sequences divided by ":". Ex. ABCD:EF01:2345:6789:ABCD:EF01:2345:6789 7. Use button to select OK and press OK button. The IPv6 address has been specified. Important • If firewall is enabled on the computer, printers on a different subnet may not be detected. Disable firewall. If firewall interferes with printer search: • If message appears: If a message appears warning that Canon software is attempting to access the network, set the security software to allow access. After allowing the software to access, specify the IP address or host name and search for printers again. If the printer is found, follow the instructions on the screen to continue to set up network communication. • If no message appears: Cancel searching printers, and then set the security software to allow Canon software below to access the network. ◦ For Windows: Setup.exe or Setup64.exe in the win > Driver > DrvSetup folder on the Setup CD-ROM ◦ For Mac OS: Setup.app, canonijnetwork.bundle, cnwidsd.plugin, and cnwidss.plugin After setting the security software, specify the IP address or host name and search for printers again. Note • For more on firewall settings of your operating system or security software, see instruction manual or contact its manufacturer. 490