Canon imagePROGRAF PRO-1000 series User Manual - Page 513

When you are using wireless LAN on your computer, make sure Wi-Fi is selected as network interface. When you are using wired LAN, make sure Ethernet is selected. 3. Check the IP address or MAC address. Click TCP/IP to check the IP address. Click Hardware to check the MAC address. Checking Communication Between the Computer, the Printer, and the Wireless Router Perform a ping test to check if communication is taking place. • For Windows: 1. Select Command Prompt as shown below. ◦ In Windows 8.1 or Windows 8, select Command Prompt from the Start screen. If Command Prompt is not displayed on the Start screen, select the Search charm and search for "Command Prompt". ◦ In Windows 7 or Windows Vista, click Start > All Programs > Accessories > Command Prompt. 2. Type ping command and press Enter. The ping command is as follows: ping XXX.XXX.XXX.XXX "XXX.XXX.XXX.XXX" is the IP address of the target device. If communication is taking place, a message like the one shown below appears. Reply from XXX.XXX.XXX.XXX: bytes=32 time=10ms TTL=255 If Request timed out appears, communication is not taking place. • For Mac OS: 1. Start Network Utility as shown below. ◦ In Mac OS X v10.10 or Mac OS X v10.9, select Computer from Go menu of Finder, doubleclick Macintosh HD > System > Library > CoreServices > Applications > Network Utility. ◦ In Mac OS X v10.8 or Mac OS X v10.7, open Utilities folder in Applications folder and double-click Network Utility. 2. Click Ping. 3. Make sure Send only XX pings (XX are numbers) is selected. 4. Enter IP address of target printer or target wireless router in Enter the network address to ping. 5. Click Ping. "XXX.XXX.XXX.XXX" is the IP address of the target device. A message such as the following appears. 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms 64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms 513