Canon imagePROGRAF PRO-1000 series User Manual - Page 200

Note • When the automatic print head alignment has not been performed, a message will appear. In this case, select Yes, press the OK button, then perform the automatic print head alignment. The paper settings screen will appear. Specify Page size and Type for the paper to be used, select Settings, then press the OK button. 6. Load the prepared paper in the paper source specified in the message. If the paper source is the manual feed tray, load one sheet of paper at a time. 7. Open the paper output tray gently. Open the output tray extension, then pull out the paper output support. 8. Press the OK button. The print head alignment pattern is printed. 9. When the message "Did the patterns print correctly?" appears, confirm that the pattern is printed correctly, select Yes, then press the OK button. 10. Confirm the message, then press the OK button. The input screen for the head position adjustment values will appear. 11. Look at the pattern and select the number of the pattern in each column that has straight lines. Press the OK button to select a column, select the pattern number, then press the OK button. * The sample of the first pattern is shown as below. 200