Canon imagePROGRAF PRO-1000 series User Manual - Page 195

Changing LAN Connection Method/Changing Wireless LAN Connection Method (Windows) Changing LAN Connection Method Changing Wireless LAN Connection Method Changing LAN Connection Method Follow either procedure below to change LAN connection method (wired or wireless). • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup. • Select LAN settings on HOME screen, select Change LAN, and then select Activate wireless LAN or Activate wired LAN. After that, perform settings on the Protocol Settings... screen on IJ Network Device Setup Utility. Refer to Performing/Changing Wireless LAN Settings to change the connection method from wired LAN to wireless LAN. Refer to Performing/Changing Wired LAN Settings to change the connection method from wireless LAN to wired LAN. Changing Wireless LAN Connection Method Follow either procedure below to change wireless LAN connection method (infrastructure or direct connection). • Use the Setup CD-ROM or follow the instructions on the Canon website to redo setup. • Perform settings on the Protocol Settings... screen on IJ Network Device Setup Utility. Important • Before you perform settings using IJ Network Device Setup Utility, turn on cableless setup mode on the printer following the procedure below. 1. Make sure printer is turned on. 2. Select LAN settings on HOME screen. LCD and Operation Panel 3. Use button to select Wireless LAN setup and press OK button. 4. Select Cableless setup and press OK button. 5. Check message and press OK button. Follow instructions on your smartphone or tablet. 6. If message saying setup is completed appears, press OK button. 195