Canon imagePROGRAF PRO-1000 series User Manual - Page 258

Important • Do not unplug the printer while the POWER lamp is lit or flashing, as it may cause malfunction or damage to the printer, making the printer unable to print. 3. Retract the paper output support, then close the output tray extension and the paper output tray. 4. Close the rear tray or the manual feed tray. To close the rear tray, retract the paper support extension, then close the paper support. To close the manual feed tray, retract the paper support extension and the paper support. 5. Unplug the printer cable from the computer and from the printer, then unplug the power cord from the printer. 6. Use adhesive tape to secure all the covers on the printer to keep them from opening during relocation. 7. Attach the protective material to the printer when packing the printer in the box. Important • Reinstall the printer on a flat place while paying attention to the ink supply stopper. Reinstalling Your printer When the preparations to transport have been done and the printer was transferred, follow the procedure below. Important • During reinstallation, a great amount of ink is consumed since ink is loaded into the printer or inside of print head. Additional new ink tanks or maintenance cartridges may be also necessary since a great amount of ink is ejected. Obtain ink tanks or maintenance cartridges before performing preparations. 1. Take the printer out of the box. 2. Press the ON button to turn on the printer. 3. Check the message, select Yes, then press the OK button. 4. When the message appears, open the tank cover, then install all removed ink tanks. Replacing Ink After the tank cover is closed, the printer starts preparations to reinstall it. Wait for a while. Do not perform any other operations during this operation. The main menu will appear after preparations to reinstall the printer are complete. 258