Canon imagePROGRAF PRO-1000 series User Manual - Page 161

◦ Bonjour settings Setting items for LAN using Bonjour for Mac OS. ■ Enable/disable Bonjour Selecting Enable allows you to use Bonjour to perform the network settings. ■ Service name Specifies the Bonjour service name. You can use up to 48 characters for the name. Note • You cannot use the same service name as that already used for other LAN connected devices. ◦ LPR protocol setting Enables/disables the LPR setting. ◦ RAW print Enables/disables RAW printing. ◦ LLMNR Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting ON allows the printer to detect printer's IP address from the printer name without a DNS server. ◦ PictBridge communication Setting items for printing from a PictBridge (Wireless LAN) compliant device. ■ Enable/disable communication Selecting Enable allows you to print from a PictBridge (Wireless LAN) compliant device. ■ Timeout setting Specifies the timeout length. ◦ Wireless LAN DRX setting Selecting Enable allows you to activate discontinuous reception when using wireless LAN. Note • Depending on the wireless router you are using, discontinuous reception may not be activated even though Enable is selected. • Discontinuous reception is enabled only while the printer is on standby. (The LCD is in the screen saver mode.) ◦ Wired LAN DRX setting Selecting Enable allows you to activate discontinuous reception when the printer is connected to a device compatible with wired LAN. ◦ Direct connection settings Setting items are available when you connect a wireless communication device such as a smartphone or tablet to the printer. Important • You can select these setting items only when Activate direct connect. is selected for Change LAN. 161