Canon imagePROGRAF iPF770 MFP M40 Basics Guide - Page 117
Paper not aligned with right guide., Cannot detect papr, Leading edge detection error.
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
iPF770 Series Paper not aligned with right guide. Paper not aligned with right guide. Cause When paper was loaded, it was not aligned with the guide on the right side. Corrective Action Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Pull out the sheet. 3. Pull the Release Lever forward. 4. Reload the sheet, aligning it with the guide on the right. Cannot detect papr Cause Corrective Action The printer could not detect the paper. Reload the paper as follows. 1. Remove the paper and press the OK button. 2. Reload the paper. (See "Loading Sheets in the Printer.") ➔P.20 (See "Loading Rolls in the Printer.") ➔P.14 Leading edge detection error. Cause Corrective Action The leading edge of the paper cannot be detected. Follow these step to reload a sheet. 1. Push the Release Lever back. 2. Reload the sheet straight, in the correct position. (See "Loading Sheets in the Printer.") ➔P.20 Error Message Paper cutting failed. Messages regarding paper Cause There are sheets left on the Ejection Guide. Corrective Action 1. Push the Release Lever back and remove the paper. 2. Load the paper. 3. Pull the Release Lever forward. 4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. (See "Loading Rolls in the Printer.") ➔P.14 There is a foreign object by the Output Tray, obstructing the Cutter Unit. 1. Lift the Top Cover and remove the foreign object. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. You are not using the printer under the recommended environmental conditions for the paper. Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions for paper, see Paper Reference Guide." (See "Displaying the Paper Reference Guide.") ➔User's Guide You are using paper that is not compatible with automatic cutting. 1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the roll. (See "Specifying the Cutting Method for Rolls.") ➔User's Guide For information about paper that is compatible with automatic cutting, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔User's Guide 2. Push the Release Lever back and remove the paper. 117 Basic Guide