Canon imagePROGRAF iPF770 MFP M40 Basics Guide - Page 63
Reinstalling the Printer, Completed! Turn Power, Power
View all Canon imagePROGRAF iPF770 MFP M40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
iPF770 Series 7 When the processing is complete, "Completed! Turn Power Off!!" is displayed. Press the Power button to turn the power off. Reinstalling the Printer Pack the printer 1 Disconnect the power cord and interface cable. • Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and Important transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this procedure again. 2 Tape down printer covers to secure them, in the reverse order of tape removal during installation. Printer Relocation Preparing to Transfer the Printer 3 Remove the Stand by reversing the installation procedure, when it was attached to the printer. 4 Disassemble and repackage the Stand by following the installation procedure in reverse. 5 Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box. Reinstalling the Printer The basic workflow for reinstalling the printer is as follows. For detailed instructions, see the Setup Guide. 63 Basic Guide