Canon imagePROGRAF iPF770 MFP M40 Basics Guide - Page 94

The printer stops during a print job, An error message is shown on the Display Screen

Page 94 highlights

An error message is shown on the Display Screen iPF770 Series The printer stops during a print job An error message is shown on the Display Screen 94 The printer ejects blank, unprinted paper ...94 An error message is shown on the Display Screen Cause The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") ➔P.17 (See "Removing the Roll Holder from Rolls.") ➔User's Guide (See "Loading and Printing on Rolls.") ➔User's Guide The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. The Printhead nozzles are clogged. A print job was received from an incompatible printer driver. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. The printer is damaged. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") ➔User's Guide Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") ➔User's Guide Use the correct imagePROGRAF printer driver for the printer and try printing again. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔User's Guide Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 94 Basic Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

The printer stops during a print job
The printer stops during a print job
An error message is shown on the Display Screen
.......................................................................................
94
The printer ejects blank, unprinted paper
.....................................................................................................
94
An error message is shown on the Display Screen
An error message is shown on the Display Screen
Cause
Corrective Action
The last portion of roll paper was used during a print job, and paper
could not be advanced because the trailing edge is taped to the
roll.
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
P.17
(See "Removing the Roll Holder from Rolls.")
User's Guide
(See "Loading and Printing on Rolls.")
User's Guide
The printer ejects blank, unprinted paper
The printer ejects blank, unprinted paper
Cause
Corrective Action
The leading edge of the roll paper was cut
to straighten it.
The leading edge of rolls may be cut to straighten it if
Trim Edge First
is set to a value
other than
Off
in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
User's Guide
The Printhead nozzles are clogged.
Print a test pattern to check the nozzles and make sure the Printhead is in good condi-
tion for printing.
(See "Checking for Nozzle Clogging.")
User's Guide
A print job was received from an incom-
patible printer driver.
Use the correct imagePROGRAF printer driver for the printer and try printing again.
The printer has received print data that in-
cludes HP RTL commands when
Auto
Rotate
is
On
in the Control Panel menu.
In the Control Panel, set
Auto Rotate
to
Off
and print again.
(See "Menu Settings.")
User's Guide
The printer is damaged.
Contact your Canon dealer for assistance.
An error message is shown on the Display Screen
iPF770 Series
Basic Guide
Troubleshooting
The printer stops during a print job
94