Canon imagePROGRAF iPF850 User Guide - Page 171

Windows Software iPF850 Paper Detailed Settings Dialog Box • B Between Pages You can set the time to wait after printing 1 document page until ejecting the paper. Since waiting time is required for ink to dry before a roll is cut, you can deliver paper in the Output Stacker with the ink dried even if Cutting Mode is set to Automatic. Setting Item Details Printer Default The setting of the control panel of the printer is applied. Off Paper is ejected immediately after printing completes. 30 sec. / 1 min. / 3 min. / 5 min. / 10 min. / 30 min. / 60 min. Paper is ejected when the set time elapses after printing completes. • C Between Scans You can set the time to wait after printing 1 line on a page until printing the next line. Set this to avoid bleeding or color unevenness such as when bleeding occurs on a page or when color unevenness occurs during borderless printing. Setting Item Details Printer Default The setting of the control panel of the printer is applied. Off The next line is printed immediately after a line is printed. 1 sec. / 3 sec. / 5 sec. / 7 sec. / 9 sec. The next line is printed when the set time elapses after a line is printed. * Increase the time according to the occurrence condition of bleeding or unevenness. Printer Driver D Roll Paper Margin for Safety You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held firmly against the Platen. • E Near End Margin Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed. Setting Item Details Printer Default The setting of the control panel of the printer is applied. 3 mm (0.12 in) The document is printed in the standard size. 20 mm (0.8 in) * Select this when you do not have any problems in printing. Select this when rubbing against the printhead occurs such as when using paper that tends to curl. F Cut Speed Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic cutting is used. Setting Item Printer Default Details The setting of the control panel of the printer is applied. High Speed When the Standard setting does not result in cutting the surface cleanly, select this. Standard Select this when you do not have any problems in automatic cutting. Low Speed This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it when using adhesive paper. G Mirror Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image 171 with the left and right sides inverted. User's Guide