Canon imagePROGRAF iPF850 User Guide - Page 41

iPF850 Roll Paper Switching Method Condition Status Condition 7 Are the widths of roll paper 1 and roll paper 2 differ- The roll paper width is the same ent? Judgment result The roll paper currently fed to the platen is selected (*1) *1:In the following case, neither roll paper 1 nor roll paper 2 is fed to the platen. In this case, roll paper 1 is selected. • When the printer enters sleep mode and then resumes • When the printer is turned on • When cut sheet is supplied and ejected Enhanced Printing Options Using double-roll printing If the Detect Mismatch setting is set to Warning or None Condition Condition 1 Is the roll paper loaded in the printer long enough to print the paper size specified in the print job? Status Only either roll paper 1 or roll paper 2 is long enough Judgment result The roll paper with enough length is selected Neither roll paper 1 nor roll paper 2 is Error long enough Both roll paper 1 and roll paper 2 are Go to Condition 2 long enough ManageRemainRoll is set to Off in the printer menu (the roll paper length cannot be identified) Condition 2 Does the roll paper loaded in the printer match the Only either roll paper 1 or roll paper media type specified in the print job? 2 matches The roll paper with the matched media type is selected Neither roll paper 1 nor roll paper 2 matches Go to Condition 3 Both roll paper 1 and roll paper 2 match Condition 3 What is the Roll Switching setting in the printer menu? Set to No RollSwitching The roll paper currently fed to the platen is selected (*1) Set to Use Optimal Size Go to Condition 4 Condition 4 Borderless printing is specified in the print job (if not specified, go to Condition 5) Only either roll paper 1 or roll paper 2 is paper that can be used for borderless printing The roll paper that can be used for borderless printing is selected Neither roll paper 1 nor roll paper 2 is Error paper that can be used for borderless printing Both roll paper 1 and roll paper 2 are paper that can be used for borderless printing Go to Condition 5 Condition 5 Does the roll paper width specified in the print job match the width of roll paper loaded in the printer? (Only for borderless printing or enlarged/reduced printing) Only either roll paper 1 or roll paper 2 is roll paper of the width specified in the print job Neither roll paper 1 nor roll paper 2 is roll paper of the width specified in the print job The roll paper with the matched roll paper width is selected Go to Condition 6 Both roll paper 1 and roll paper 2 are 41 roll paper of the width specified in the print job The roll paper width is not specified in the print job Condition 6 Does the width of roll paper loaded in the printer Only either roll paper 1 or roll paper accommodate the width of the paper size specified 2 accommodates the paper size in the print job? width specified in the print job The roll paper that accommodates the paper size width is selected User's Guide