Canon imagePROGRAF iPF850 User Guide - Page 348

Handling and Use of Paper Handling rolls Loading Rolls in the Printer ManageRemainRoll On Barcodes Not printed Printer Operation After the Paper is Fed A menu for selection of the type and length of paper is shown on the Display Screen. Press ▲ or ▼ to select the type and length of paper loaded, and then press the OK button. iPF850 • Cut the edge of the roll using the Paper Cutting function if the edge is creased or soiled. (See "Specify- Important ing the Cutting Method for Rolls.") ➔P.360 • For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper Note Reference Guide.") ➔P.335 • Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quali- ty. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.556 Loading rolls in the Roll 2 (Lower) holder • Do not detach the Roll Unit in the following cases. Caution • During printing Vibration from removing the Roll Unit may affect the printing quality. • If a sheet is loaded in the printer The sheet may be ejected, and (rarely) it may be bent. 1 Press the Load button. 2 Press ▲ or ▼ to select Roll 2 (Lower), and then press the OK button. • If any cut sheet has been fed, or roll paper that will not be used has been fed from Roll 2 (Lower), a Note message is shown requesting you to remove it. Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step. • If roll paper is loaded in Roll 2 (Lower) but Roll 2 (Lower) is not selected as the paper source, a message asking you whether or not to change paper is displayed. Press ▲ or ▼ to select Load, and then press the OK button. Remove the paper and proceed to the next step. 3 Holding the Roll Unit Lever (a), pull out the Roll Unit. 348 a User's Guide