Canon imagePROGRAF iPF850 User Guide - Page 360

Specifying the Cutting Method for Rolls 3 In the Paper Detailed Settings dialog box displayed next, select the desired settings values in C Between Pages and D Between Scans in B Drying Time, and then click OK. (See "Paper Detailed Settings Dialog Box (Mac OS).") ➔P.276 iPF850 Handling and Use of Paper Handling rolls Specifying the Cutting Method for Rolls How rolls are cut after ejection varies depending on printer settings. Automatic Eject (when the paper surface is being scratched / to wait for ink to dry) Cutting Method The roll is automatically cut by the Cutter Unit following printer driver settings. Select this to move the cutter by key operation and cut paper. Although there are cases with Automatic in which the paper falls and the paper surface is scratched when the paper rubs the Output Stacker, you can avoid damaging the paper with this method since you can cut by holding the paper with your hand so that the paper does not fall when cutting, Also, since you can cut while visually confirming the drying of the ink, you can avoid ejecting paper before the ink has dried. To cut the roll with the Cutter Unit, press the Cut button. Printer Setting Media Menu > Paper Details > (Various Types of Paper) > Cutting Mode Automatic Eject Driver Setting Automatic Yes Cutting (See "Cutting Roll Yes Paper After Print- ing.") ➔ P.152 Manual (when using media that cannot be cut with the Cutter Unit ) Select this for paper that cannot be cut with the Cutter Unit and for paper of which the leading edge curls strongly and rubs the printhead. Cut each page from the roll using scissors. For continuous printing (if you will cut each page later), select Automatic Cutting > Yes or select Print Cut Guideline. Manual No, Yes, Print Cut Guideline Paper cut- Choose this option if you want to cut pages by Cut button Yes ting (to pressing Cutter Unit buttons for manual cutting after pressed have the printing when Automatic Cutting > No is selected roll cut at or Print Cut Guideline is selected in the printer your speci- driver. fied posi- Otherwise choose this option if you want to cut the 360 tion) roll edge after loading a roll. No, Print Cut Guideline User's Guide