Canon imagePROGRAF iPF850 User Guide - Page 660
Roll x jam (x is 1 (Upper) or 2 (Lower)), Paper loaded askew., Paper cutting failed.
View all Canon imagePROGRAF iPF850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 660 highlights
Roll x jam (x is 1 (Upper) or 2 (Lower)) Roll x jam (x is 1 (Upper) or 2 (Lower)) iPF850 "Lift the release lever." Cause A paper jam occurred in the printer during printing. Corrective Action 1. Lift the Release Lever and remove the jammed paper. (See "Clearing Jammed Roll Paper.") ➔P.619 (See "Clearing a Jammed Sheet.") ➔P.622 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. "Manually rewind the roll all the way and press OK." Cause A paper jam occurred when advancing the paper. Corrective Action 1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. Paper loaded askew. Cause Paper loaded crooked was detected when the paper was advanced. Corrective Action Lift up the Release Lever and reload the paper. (See "Loading Rolls in the Printer.") ➔P.345 (See "Loading Sheets in the Printer.") ➔P.369 If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in until it touches the Roll Holder flange, and reload the Roll Holder in the printer. (See "Attaching the Roll Holder to Rolls.") ➔P.342 Error Message Messages regarding paper • To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose Off or Loose Important in the Skew Check Lv. setting of the printer menu. However, this may cause jams and printing problems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the back of the next document when it is printed. Paper cutting failed. Cause Corrective Action There are sheets left on the Ejection Guide. 1. Lift the Release Lever and remove the paper. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. 660 There is a foreign object by the Output Tray, obstructing the Cutter Unit. 1. Lift the Top Cover and remove the foreign object. 2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button. Printing will resume, starting from the page on which the error occurred. You are not using the printer under the recommended environmental conditions for the paper. Use the printer only where the recommended environmental conditions for the paper are met. Note that various environmental conditions are recommended for various types of paper. For details on the recommended environmental conditions for paper, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.335 User's Guide