Canon imagePROGRAF iPF850 User Guide - Page 666
Messages regarding printheads, Cannot adjust printhead., Wrong printhead., Printhead error
View all Canon imagePROGRAF iPF850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 666 highlights
Cannot adjust printhead. iPF850 Messages regarding printheads Cannot adjust printhead...666 Wrong printhead...666 Printhead error ...666 Cannot recognize print head...666 Execute printhead cleaning...667 Cannot adjust printhead. Cause The Printhead nozzles are clogged. The Printhead cannot be aligned; highly transparent film is loaded. The Printhead is installed crooked. Corrective Action Execute Head Posi. Adj. again, as follows. 1. Press the OK button to clear the error. 2. Print a test pattern to check the nozzles. (See "Checking for Nozzle Clogging.") ➔P.585 3. Clean the Printhead if the nozzles are clogged. (See "Cleaning the Printhead.") ➔P.586 4. Execute Head Posi. Adj. again. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.556 Press the OK button to clear the error. We recommend using a type of paper that you often use, other than film, for Printhead adjustment. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.556 Straighten the Printhead as follows, and then execute Head Posi. Adj. again. 1. Press the OK button to clear the error. 2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead. (See "Adjusting Line Misalignment.") ➔P.560 3. Execute Head Posi. Adj. again. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.556 Error Message Messages regarding printheads Wrong printhead. Cause An incompatible Printhead has been installed. Corrective Action Open the Top Cover and replace the Printhead with a new one. (See "Replacing the Printhead.") ➔P.587 Printhead error Cause There is a problem with the Printhead. Corrective Action Open the Top Cover and replace the Printhead with a new one. (See "Replacing the Printhead.") ➔P.587 Cannot recognize print head. No Printhead is installed. Cause Corrective Action Follow these steps to install the Printhead. 1. Open the Top Cover. 666 2. Install the Printhead. (See "Replacing the Printhead.") ➔P.587 The Printhead cannot be recognized because it is not installed correctly. Follow these steps to reinstall the Printhead. 1. Open the Top Cover. 2. Reinstall the Printhead. (See "Replacing the Printhead.") ➔P.587 User's Guide