Canon imagePROGRAF iPF850 User Guide - Page 376
Installing and Removing the Stacker On the Printer, Ready to print
View all Canon imagePROGRAF iPF850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
Installing and Removing the Stacker On the Printer iPF850 • When performing work between the Stacker and printer, such as when replacing the paper, take care that your Caution feet do not get caught on the cables. • When moving the Stacker, move it by holding the Stacker outer frame (b) with the canopy (a) closed. Moving it by holding any other location may cause injuries or damage to the stacker. a Handling and Use of Paper Stacker b • When loading paper in the printer, first move the Stacker away from the printer. Important • When printing on cut sheets, always move the Stacker away from the printer. • When moving the Stacker, take care to ensure that the cables do not get caught on the casters. • Before moving the Stacker, clear away all the paper contained in the stacker. If you move the Stacker while it still contains paper, the printed documents may become scratched or misaligned and the next ejection may not be performed properly. • Do not place anything on top of the Stacker. Applying excessive force can cause damage. • Turn the printer and Stacker off before removing the Stacker cable. • When connecting the Stacker cable, turn the printer off, attach the cable, and then turn the printer on again. • The Stacker Canopy may become difficult to open depending on how it is stored. If this happens, have two peo- ple hold the handles on the left and right side of the Canopy and open the left and right sides simultaneously while ensuring that the Canopy does not bend. • For information on paper that is supported for ejecting to the Stacker, refer to the Paper Reference Guide. (See Note "Displaying the Paper Reference Guide.") ➔P.335 The operation may not function correctly for paper not listed here. • The Stacker can hold 100 sheets of A0 size. (When the AutoCAD LT2004 sample image Cottage Plan and Eleva- tion.dwg was printed.) Installing and Removing the Stacker On the Printer Installing the Stacker on the Printer When ejecting to the Stacker, install the Stacker on the printer using the following procedure before starting printing. • Before installing the Stacker on the printer, load the roll paper you will use and check that "Ready to print" is dis- Note played on the Display Screen. (See "Loading Rolls in the Printer.") ➔P.345 376 User's Guide