Canon imagePROGRAF iPF850 User Guide - Page 665
Messages regarding printing or adjustment, Cannot print as specified.
View all Canon imagePROGRAF iPF850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 665 highlights
iPF850 Messages regarding printing or adjustment Cannot print as specified. Cannot print as specified...665 Cannot adjust printhead...666 Borderless printng not possible. Paper stretched or shrank 665 Before borderless printing, move the blue platen switch 665 Borderless printng not possible...661 Blue platen switch is dirty...665 Move the blue platen switch No.xx to the right. (xx represents a number 665 Check printed document...665 Cannot print as specified. "Lift the release lever and replace paper with A4/LTR (vertical) or larger." Cause Corrective Action The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger. "Lift the release lever and replace roll with 10 in. wide or larger roll." Cause Corrective Action The loaded paper is too small. Load a roll 10 inches wide or larger. Error Message Borderless printng not possible. Paper stretched or shrank. Cause The loaded roll has expanded or contracted due to environmental conditions, making it wider or narrower than the supported width for borderless printing. Corrective Action Press the OK button to stop printing. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (See "Displaying the Paper Reference Guide.") ➔P.335 Messages regarding printing or adjustment Before borderless printing, move the blue platen switch. Cause The blue Switch on the platen was set to the side opposite ● when a borderless print job was received. Corrective Action Before borderless printing, set the blue Switch on the platen to the ● side. (See "Setting the Blue Switch on the Platen.") ➔P.638 Blue platen switch is dirty. Cause The blue Switch on the platen is dirty. Corrective Action Open the Top Cover and clean the blue Switch on the platen. (See "Cleaning Inside the Top Cover.") ➔P.599 Move the blue platen switch No.xx to the right. (xx represents a number) Cause Corrective Action The printer has detected that the blue Switch on the platen nee- Set blue platen Switch of the indicated number toward the ● side. ded in maintenance during printing is set away from the ● mark. (See "Setting the Blue Switch on the Platen.") ➔P.638 665 Check printed document. Cause The Printhead nozzles are becoming clogged. Corrective Action If printing is faint, clean the Printhead. (See "Cleaning the Printhead.") ➔P.586 User's Guide