Cisco AS5400XM Installation Guide - Page 49
Installing the CT3 Feature Card
UPC - 746320997261
View all Cisco AS5400XM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 4 Channelized T3 Feature Card Online Insertion and Removal of the CT3 Feature Card Figure 4-6 Removing the Feature Card from the Cisco AS5350XM Universal Gateway 58761 Figure 4-7 Removing the Feature Card from the Cisco AS5400XM Universal Gateway 37168 Step 10 Step 11 After you remove the feature card from the chassis, set it aside on an ESD-preventive mat. If a feature card slot on the carrier card is to remain empty, install a blank cover over the open feature card slot to ensure proper airflow inside the chassis. (See Figure 4-8.) Figure 4-8 Blank Feature Card Cover 36033 Installing the CT3 Feature Card Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Note When you replace a feature card with a new feature card of the same type in the same slot, the system software recognizes the new feature card and brings up the trunk interfaces automatically. If you replace the existing feature card with a new feature card of a different type, you must reconfigure the system. For configuration details, see the Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide. 78-17406-01 Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide 4-5