Cisco DS-C9124-K9 Troubleshooting Guide - Page 435

Chapter 20 Troubleshooting IP Storage Services iSLB Issues Send documentation comments to [email protected] iSLB Configuration Failed-"Pending iSLB CFS Config Has Reached Its Limit..." Symptom iSLB configuration failed with error Pending iSLB CFS config has reached its limit.. Table 20-7 iSLB Configuration Failed-"Pending iSLB CFS Config Has Reached Its Limit..." Symptom iSLB configuration failed with error Pending iSLB CFS config has reached its limit. Possible Cause The limit of 200 initiators in the pending database has been reached, so no more configuration is allowed Solution Use the islb commit CLI command to commit the outstanding changes. iSCSI Disable Failed-"Cannot Disable Iscsi - Large Iscsi Config Present..." Symptom iSCSI disable failed with error Cannot disable iSCSI - large iSCSI config present. Table 20-8 iSCSI Disable Failed-"Cannot Disable Iscsi - Large Iscsi Config Present..." Symptom iSCSI disable failed with error Cannot disable iSCSI large iSCSI config present.. Possible Cause Solution There are more than 200 initiators in Delete initiators from the configuration until you have less the running config, so iSCSI disable is than 200 initiators. Then use the no iscsi enable CLI not allowed. command to disable iSCSI. iSLB Commit Timeout Symptom iSLB commit timeout. Table 20-9 iSLB Commit Timeout Symptom iSLB commit timeout. Possible Cause When a large configuration is present, it is possible for the iSLB commit to take a long time. Solution Check the output of the show islb cfs-session status CLI command to get the status of the commit. OL-9285-05 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x 20-61