Cisco SPA2102-NA User Guide - Page 16
The Front Panel, Power, INTERNET, PHONE 1/2, PHONE, Proceed to Getting Started. - firmware upgrade
View all Cisco SPA2102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Phone Adapter with Router The Front Panel The Phone Adapter's LEDs, which inform you about network activities, are located on the front panel. Power INTERNET PHONE 1/2 Figure 3-2: Front Panel Green. The Power LED lights up when the Phone Adapter is powered on and connected to the Internet. It flashes when the Phone Adapter is not connected to the Internet. The LED also flashes when the Phone Adapter is booting up or upgrading its firmware. Green. The INTERNET LED lights up when there is an active connection through the port. If the LED is flashing, then there is traffic moving through that port. Green. The PHONE LED is solidly lit when a telephone or fax machine has an active or registered connection to babyTEL through the corresponding port. It flashes when the phone is being used or is off the hook. Proceed to "Chapter 4: Getting Started." 8 Chapter 3: Getting to Know the Phone Adapter The Front Panel