Cisco SPA2102-NA User Guide - Page 26
Action, Command, press these, keys on the, telephone, Choices, Description, firmware
View all Cisco SPA2102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Phone Adapter with Router Interactive Voice Response Menu Action Check Firmware Version Check Primary DNS Server IP Address Check Internet Web Server Port Check Local IP Address Set Internet Connection Type Set Static IP Address Command (press these keys on the telephone) 150 160 170 210 101 111 Choices Press 0 to use DHCP. Press 1 to use a static IP address. Press 2 to use PPPoE. Enter the IP address using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Description Hear the version number of the firmware currently running on the Phone Adapter. Hear the IP address of the primary DNS (Domain Name Service) server. Hear the port number of the Internet Web server used for the Web-based Utility. Hear the local IP address of the Phone Adapter. Select the type of Internet connection you are using. Refer to the documentation supplied by your Internet Service Provider (ISP). First, set the Internet Connection Type to static IP address; otherwise, you will hear, "Invalid Option," if you try to set the static IP address. firmware: the programming code that runs a networking device. dhcp (dynamic host configuration protocol): a protocol that lets one device on a local network, known as a DHCP server, assign temporary IP addresses to the other network devices, typically computers. static ip address: a fixed address assigned to a computer or device that is connected to a network. pppoe: a type of broadband connection that provides authentication (username and password) in addition to data transport. 18 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu