Cisco SPA2102-NA User Guide - Page 36
Optional Settings, MAC Clone Settings, Remote Management, QOS Settings, Enable MAC Clone Service - wan web server
View all Cisco SPA2102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Phone Adapter with Router PPPoE Service Name (optional). Enter the service name provided by your ISP. Optional Settings HostName. Enter the host name, if provided by your ISP. Domain. Enter the domain name, if provided by your ISP. Primary DNS. Enter the IP address of the primary DNS server. Secondary DNS (optional). Enter the IP address of the secondary DNS server. MAC Clone Settings Enable MAC Clone Service. Select whether you want to clone a MAC address onto the Phone Adapter, yes or no. The default is no. Cloned MAC Address. Enter the MAC address you want to clone. mac address: the unique address that a manufacturer assigns to each networking device. Remote Management Enable WAN Web Server. This feature lets you enable or disable access to the Web-based Utility from the WAN side. Select yes or no from the drop-down menu. The default is no. WAN Web Server Port. Enter the port number used to access the Utility from the WAN side. The default is 80. QOS Settings QOS QDisc. QoS prioritizes voice communications when different types of traffic are competing for bandwidth. Select the method you want to use: NONE, CBQ, or TBF. The default is NONE. 28 Chapter 6: Using the Web-based Utility The Router Tab