Cisco SPA2102-NA User Guide - Page 28
This feature may be, protected by a password, available only from, If you need to enter a password - reset
View all Cisco SPA2102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Phone Adapter with Router Interactive Voice Response Menu Action Set the Mode Enable/Disable WAN Access to the Web-based Utility Manual Reboot Factory Reset Command (press these keys on the telephone) 201 Choices Press 0 to select the router/NAT mode. Press 1 to select the bridge/switch mode. 7932 Press 1 to enable. Press 0 to disable. 732668 73738 Press 1 to confirm. Press * (star) to cancel. Description If the Phone Adapter acts as the router for your network, use the router/NAT mode. If your network already has a router, use the bridge/switch mode. Use this setting to enable or disable WAN access to the Web-based Utility. (This Utility lets you configure the Phone Adapter.) After you hear, "Option successful," hang up the phone. The Phone Adapter will automatically reboot. If necessary, enter the password. The Phone Adapter will request confirmation; enter 1 to confirm. You will hear, "Option successful." Hang up the phone. The Phone Adapter will reboot, and all settings will be reset to their factory default settings. NOTE: This feature may be protected by a password available only from babyTEL. If you need to enter a password, refer to the following section, "Entering a Password." 20 Chapter 5: Using the Interactive Voice Response Menu Using the Interactive Voice Response Menu