Cisco SPA2102-NA User Guide - Page 23
Using the Interactive Voice Response Menu, Overview, Accessing the Interactive Voice - phone commands
View all Cisco SPA2102-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Phone Adapter with Router Chapter 5: Using the Interactive Voice Response Menu Overview NOTE: If babyTEL sent you the Phone Adapter, then it may be pre-configured for you, and you do not need to change any settings. Refer to the instructions supplied by babyTEL for more information. You may need to manually configure the Phone Adapter by entering the settings provided by babyTEL. This chapter explains how to use the Interactive Voice Response Menu to configure the Phone Adapter's network settings. You will use the telephone's keypad to enter your commands and select choices, and the Phone Adapter will use voice responses. For more advanced configuration, refer to "Chapter 6: Using the Web-based Utility." Accessing the Interactive Voice Response Menu 1. Use a telephone connected to one of the Phone Adapter's PHONE ports. (You can only access the Interactive Voice Response Menu through an analog telephone, not any of the Internet phones.) 2. Press **** (in other words, press the star key four times). 3. Wait until you hear "Linksys configuration menu. Please enter the option followed by the # (pound) key or hang up to exit." 4. Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone. Chapter 5: Using the Interactive Voice Response Menu 15 Overview