Cisco VG224 Hardware Installation Guide - Page 71

V.35 Connections, EIA/TIA-530 Connections, A-9, V.35 Serial Transition Cable Connectors

Get Cisco VG224 - Analog Phone Gateway PDF manuals and user guides
UPC - 746320575360
View all Cisco VG224 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Appendix A Cable Specifications and Information Analog Voice Multiport Pinouts (RJ-21X/CA21A) V.35 Connections The V.35 standard is recommended for speeds up to 48 kbps, although in practice it is used successfully at 4 Mbps. The Cisco VG224 voice gateway supports speeds up to 2.048 Mbps. Use the V.35 serial transition cable (not included) with the Cisco 12-in-1 connector on one end and a standard 34-pin Winchester-type connector (as shown in Figure A-9) on the other. The 34-pin Winchester-type connector can be male for DTE or female for DCE. To order a cable, see the "Obtaining Technical Assistance" section on page 16. Figure A-9 V.35 Serial Transition Cable Connectors DTE 8 1 15 9 DCE 194833 X.21 Connections The X.21 connector uses a 15-pin connector for balanced circuits and is commonly used in the United Kingdom to connect to the public data network. X.21 relocates some of the logic functions to the DTE and DCE interfaces and, as a result, requires fewer circuits and a smaller connector than EIA/TIA-232. Use the X.21 serial transition cable (not included) with the Cisco 12-in-1 connector on one end and a DB-15 connector (as shown in Figure A-10) on the other. The DB-15 connector can be male for DTE or female for DCE. To order a cable, see the "Obtaining Technical Assistance" section on page 16. Figure A-10 X.21 Serial Transition Cable Connectors DTE DCE 194834 EIA/TIA-530 Connections The EIA/TIA-530 standard, which supports balanced transmission, provides the increased functionality, speed, and distance of EIA/TIA-449 on the smaller, DB-25 connector used for EIA/TIA-232. Like EIA/TIA-449, EIA/TIA-530 refers to the electrical specifications of EIA/TIA-422 and EIA/TIA-423. Although the specification recommends a maximum speed of 2 Mbps, EIA/TIA-530 is used successfully at 4 Mbps or faster speeds over short distances. Cisco VG224 voice gateway supports speeds up to 2.048 Mbps. Use the EIA/TIA-530 serial transition cable (not included) with the Cisco 12-in-1 connector on one end and a DB-25 connector (as shown in Figure A-11) on the other. The DB-25 connector can be male for DTE or female for DCE. To order a cable, see the "Obtaining Technical Assistance" section on page 16. OL-5006-04 Cisco VG224 Voice Gateway Hardware Installation Guide A-9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
A-9
Cisco VG224 Voice Gateway Hardware Installation Guide
OL-5006-04
Appendix A
Cable Specifications and Information
Analog Voice Multiport Pinouts (RJ-21X/CA21A)
V.35 Connections
The V.35 standard is recommended for speeds up to 48 kbps, although in practice it is used successfully
at 4 Mbps. The Cisco VG224 voice gateway supports speeds up to 2.048 Mbps.
Use the V.35 serial transition cable (not included) with the Cisco 12-in-1 connector on one end and a
standard 34-pin Winchester-type connector (as shown in
Figure A-9
) on the other. The 34-pin
Winchester-type connector can be male for DTE or female for DCE. To order a cable, see the
“Obtaining
Technical Assistance” section on page 16
.
Figure A-9
V.35 Serial Transition Cable Connectors
X.21 Connections
The X.21 connector uses a 15-pin connector for balanced circuits and is commonly used in the
United Kingdom to connect to the public data network. X.21 relocates some of the logic functions to the
DTE and DCE interfaces and, as a result, requires fewer circuits and a smaller connector than
EIA/TIA-232.
Use the X.21 serial transition cable (not included) with the Cisco 12-in-1 connector on one end and a
DB-15 connector (as shown in
Figure A-10
) on the other. The DB-15 connector can be male for DTE or
female for DCE. To order a cable, see the
“Obtaining Technical Assistance” section on page 16
.
Figure A-10
X.21 Serial Transition Cable Connectors
EIA/TIA-530 Connections
The EIA/TIA-530 standard, which supports balanced transmission, provides the increased functionality,
speed, and distance of EIA/TIA-449 on the smaller, DB-25 connector used for EIA/TIA-232. Like
EIA/TIA-449, EIA/TIA-530 refers to the electrical specifications of EIA/TIA-422 and EIA/TIA-423.
Although the specification recommends a maximum speed of 2 Mbps, EIA/TIA-530 is used successfully
at 4 Mbps or faster speeds over short distances. Cisco VG224 voice gateway supports speeds up to 2.048
Mbps.
Use the EIA/TIA-530 serial transition cable (not included) with the Cisco 12-in-1 connector on one end
and a DB-25 connector (as shown in
Figure A-11
) on the other. The DB-25 connector can be male for
DTE or female for DCE. To order a cable, see the
“Obtaining Technical Assistance” section on page 16
.
1
8
15
9
DCE
DTE
194833
194834
DTE
DCE