Compaq Portable 286 Compaq Portable Computer, Compaq Plus Personal Computer, a - Page 31
Fixed Disk Drive
View all Compaq Portable 286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1716 - 02 1716 - 03 Exceeded maximum hard error limit Previously exceeded maximum soft error limit 3. Replace the fixed disk drive controller board. * 4. Replace the fixed disk drive assembly. 5. Replace the system board. 1716 - 04 Previously exceeded maximum hard error limit * 286 based COMPAQ Personal Computers only 1716 - 05 Failed to reset controller 1716 - 06 Fatal error while reading 1716 - 07 Fatal error while writing 1716 - 08 Failed compare of write/ read/compare test Error Error Required Code Description Action Fixed Disk Drive 17yy - xx 1716 - 09 Failed to format a track The following steps apply to error codes 1700 - xx through 1716 - 59: 1716 - 10 Failed sector wrap test 1. Check the fixed disk drive 1716 - 40 Failed cylinder 0 controller board for the proper switch setting 1716 - 41 Drive not ready (see Chapter 8). * 2. Replace the fixed disk drive 1716 - 42 Recalibrate failed fixed signal and power cables. disk drive 3. Replace the fixed disk drive controller board. * 1716 - 43 Failed to format bad track 4. Replace the fixed disk drive assembly. 1716 - 44 Failed fixed disk drive 5. Replace the system board. controller diagnostics * 286 based COMPAQ Personal 1716 - 45 Failed to get drive Computers only parameters from ROM 1716 - 46 Invalid drive parameters found in ROM 1716 - 47 Failed to park heads 1716 - 48 Failed to move disk table to RAM 1716 - 50 Failed file I/O test in write test Error Error Required Code Description Action Fixed Disk Drive 17yy - xx