Compaq Portable 286 Compaq Portable Computer, Compaq Plus Personal Computer, a - Page 97
NOTE: Step 9 describes removing Device 2A. Step 10 describes removing, Device 1A.
View all Compaq Portable 286 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
front shock mount of each enclosure NOTE: If removing a diskette drive or tape drive in a COMPAQ PORTABLE 286, continue with the procedures in this section. At this point, determine which device in Enclosure A is to be removed. This guide refers to the device closest to the monitor as 1A and the other device as 2A (Figure 7.11-10). NOTE: Step 9 describes removing Device 2A. Step 10 describes removing Device 1A. To remove Device 2A from the enclosure: 9. Remove the four mounting screws from the bottom (or the side nearest Enclosure B) that secure the device to the enclosure and slide it out of the enclosure (Figure 7.11-11).
front shock mount of each enclosure.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
NOTE: If removing a diskette drive or tape drive in a COMPAQ PORTABLE 286,
continue with the procedures in this section.
At this point, determine which device in Enclosure A is to be removed. This
guide refers to the device closest to the monitor as 1A and the other device
as 2A (Figure 7.11-10).
NOTE: Step 9 describes removing Device 2A. Step 10 describes removing
Device 1A.
To remove Device 2A from the enclosure:
9. Remove the four mounting screws from the bottom (or the side nearest
Enclosure B) that secure the device to the enclosure and slide it out of
the enclosure (Figure 7.11-11).